bit preparation giulietta 2.0 170cv

[carlo abarth]

if I would have the opportunity to see the fiel will I hand ADMIN .... help!!!

[egs]

But you can download the files. You have exceeded the minimum threshold by many messages.

[Errecinque]

But you can download the files. You have exceeded the minimum threshold by many messages.

About the small OT. From the mobile mode cannot download the file. It is a limitation of vbulletin, or a choice?

[Errecinque]

Nothing to do to me stays with dpf and probe
Mine is a euro 5 with start&stop

To address clogging are already ok
I only want to change the setting

Tried the clog to -4 in decimal 16bit?

[...Fede...]

Tried the clog to -4 in decimal 16bit?

with the bit 1e0a32 in 8-bit 0 and the bit 1ebf32 at -4 (16 bit

the situation remains unchanged
I attach the screen of the mes

[...Fede...]

I was wrong to write to the bit is 1e0a36

[Errecinque]

Faith have you tried any solution? You've solved the problem?

[...Fede...]

Faith have you tried any solution? You've solved the problem?

Not yet

[fabbiotto]

Hello let loose of the change of the set-up could be done only on some of the euro 4 the euro 5 does not work do luca stanca the classic, as always, of course we talk about edc16 c39 fiat group.

[tranky]

Hello all,
I open this post as incomplete info about it.
Possible to know how to exclude the dpf on this car so permanent and final, and related dtc ?
Thanks
I attach a file ori noegr

Juliet 784_796-ORI+EGROFF.rev1.rar