DPF removal EGR on the Alfa 159 2.4 JTDM

[zxrrr]

when you have time, you should see if it actually if everything works, otherwise the light will turn on always notify you of the anomaly of the egr, and them or replace or otherwise close all given that the mechanism does not function, and delete the reporting of the error from the ecu

I think at this point is better to close everything and delete the error from the ecu...you can always do from the ECM?

[ultimo000]

Hello errecinque, I have removed the fap and uploaded the modified map as suggested. Everything is ok....the machine goes that this is a pleasure.
Some time ago I closed the egr only mechanically with the plate, and I have walked many miles with the light on....since a few weeks the light turns this off....strange...I cracked the plate?
I don't think perchĕ on the 147 I have a sheet perforated by 6 mm and the light remains on. Do you have any idea?

[Errecinque]

If you have the management egr excluded in the map it is normal to be turned off the light.

[ultimo000]

The management of egr this is been active

[Errecinque]

The management of egr this is been active

If you're able to do the switch off you can safely disable the egr. There are plenty of examples on the forum for this ecu

[cerbino]

I first I disabled the EGR from the map and walked around for 3 years without lamination, no lights are on and the car was fine. Then, on the occasion of the removal of the intake manifold to remove the swirl I did put a sheet of stainless steel from 2mm on the egr side of the pipe that comes from the exhaust manifold and that's fine,

[Julez]

I learned thanks to the forum then it is fair to share to those who do not know. 1DE432 display 8-bit take it from 1 to 2 . 1e46ee in 16-bit carry from 400 to val max 65535. And the dpf is as if there were

[cinqueturbo]

[Julez]

.

[Julez]