Hi Guys,
just me ? arrived in the workshop a Vito 115 cdi with a strange problem, the cio? when the machine ? in the machine stops in P feel the vibrations.. If I accelerate the vibration continues for up to 1500 rpm and after which? disappears..
The oil change I checked in and ? to ****llo.
On the road it is fine and no problem with the shifting of gears..
Pu? be that the converter (gearbox) of the couple is breaking up?
Thank you in advance for your advice and help
try changing the oil with one original is the cheapest thing to do
hello the media engines in which the conditions are?
but when you travel low rpm with a gear longer due to the fa?
So Guys Problem solved.. I Had already changed the oil but continued to do so. Yesterday, I was from a colleague who has cleaned the inside of the transmission with a machine and has returned to the oil. Until now, no vibration and I noticed that it changes gears very smoothly compared to before.. Hopefully not reoccur the more this vibration
it was only if I went down below 1500 rpm with any gearOriginally Written by franco-electr
but it was swept by the exchange during the dry
it is a bit of a grinder is out is when I changed and I both when we did the laundry at the exchange rate..
the fact is that, up until now, doing averts goes well and vibrates more
On automatic transmissions always use the original oil.. And also happened to me on a range rover..
a little I think that is normal
thanks
Quote
