I've done it on a delphi CRD 2.2 with the v53 clone and the protocol jtag and ? was perfect..
I've done it on a delphi CRD 2.2 with the v53 clone and the protocol jtag and ? was perfect..
sorry,crd 2.61
the diagram of the wires to be welded to the jtag on the pcb of the ecu and in the sw of the chicken??
A rider does not create queues even in the car...
a automoblista create queues even on a motorcycle...
It is all in the documentation
if you can? to be useful, I am attaching the schema (DELPHI CRD 2.61, or also included the DELPHI CRD 2.10 )Originally Written by munro
MB TG-tech V53 clone.rar
guys,3.2 to make it through the bdm, but I just can not connect to it,advice? I connected with the e xxx the mirror of the cock, but nothing the same
*****I baked my first unit!!!
azz.... how ? success.
ugo ---- president A.E.P.
I had made the 3.5 but never the 3.2 that you can do in the bdm,I thought enough of the e xxx delphi,I realized too late that the contacts are on the contrary,I went there with legerezza why? I didn't believe you could burn when supplied from the comb and you work on the bdm, and then I made a fool,now I'm in difficulty? why? is not easily
solved,found the new ecu,found the backup(even if different software) exchanged e2prom,put the software on the new ecu,car game,remapped and everything is ok,a little gain and so much fear!!
the first one I had burned why? I had used the e xxx spring standard
on the new system that I had used was not making good contact at the e xxx the mirror,fortunately, after checking again for the good of all ? went well
Write permission
Quote