marelli cdc clone

[Iltulipanonero]

? can you post a screen of the program?
Which version do you have? Just to see which interface I... excuse me, but are the first steps.

[gcmotor]

Arrived a few days ago

I have yet to try it in boot-mode. Today I made several tests in serial with 5.9 M, which is 5AM and I have to re that ? very stable and reliable. The read and write times are the standard for these units.
I tried both to upload files to 320kb format .bin files from 304kb format .hex and in both cases it works. It is curious that with the files from 304 first perform a read of the boot of the controller (at least cos? writes the SW during this operation), and then write the flash.
One thing I do not ? success: the changing of the date of programmazion of the control unit. I have uploaded the file e2p (where I had modified the code tester), uploaded the file to the flash format 320kb but I only change the code tester... there giocher? still figuring out how to do!!

A few question for those who already? the usa: to put the boot in the wiring kit with free cable I have the cable for the bootstrap. Should I add it myself?
Simply adding a wire from the cable of the negative that connects the metal body of the control unit with an alligator clip to and point to the pitch of the bootstrap?
On the ecu, do you prefer to use as a negative pin 10, 34, or both, or ? indifferent?

M999

I fixed it, just like I suggested

I peeled the negative and you ? the treaty of a simple addition of a thread that I have linked to one of the two ends? an alligator clip to that will be? to attach to the metal body of the unit. On the other end? the alligator clip to I connected a second wire with the end? to the point (simple needle of steel), the pitch of the bootstrap.

M999

Hi I have bought this interface, in boot mode I have not tried it yet. I tried to read a Marelli ecu, ducati monster in the serial but nothing. It is as if the software does not see it. I wanted to read in boot mode, but the inside does not seem to me like 59f of the fiat punto, to understand, and I can't find the site for your boot

[scinti]

I was wondering who uses it if it really is also the m1.5.5.and the 7.3 thanks

[ghironfa]

is immo off about 5am hw610??