Sorry Alfetta80 I've never done so many tests, why? ecu of the type c'? they are now few and I was never put to the study.
We just wanted to say as I did.
Sorry Alfetta80 I've never done so many tests, why? ecu of the type c'? they are now few and I was never put to the study.
We just wanted to say as I did.
but if the changes to the e2p part without problems?or there may be problems?Originally Written by michele30
aaaa ok, you need a partial, and the partial there are no problems, usually sw immo work, but also swap the e2prom ? a solution.
you can also make a tot. you have to cut the wire to pin 20 and I am not proven but the partial works very well tested 100%
just process the file, and when you weld the eeprom, the pin 7 and the lift from the PCB and put it on pin 8 of the same eeprom, and ? everything is ok
are you sure that go
Try x to believe the fact on a palio by removing the box code before starting?... Let us know if it goes
Quote
