then in practice you should buy a programmer type mpps that costs the least of all and for your personal use and your vehicle should be more than good,then read the file of the ecu,open it in 2d out of the driver with ecm titanium and individuals, the curve that excludes the egr and intervene manually to make sure that the value is set to exclude the egr then it's not a simple thing.Originally Written by SanJoe
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
Whats the SW an HW of the car? and the construcion year?
The hardware and software are usually related to the engine control unit, and you can? read them with a diagnosis tool or by reading the mapping.
Maps to exclude the EGR usually are out of the driver, the cio? are not in the list that has ECM Titanium, if you take a look at the forum you will definitely find what you are looking for and then once you understand how to do it, it becomes all the more? simple.
I understand, as I can recognize the curve out of the driver? Has caratterictiche accurate? In which position is usually?
I repeat do not, and is not to help you but if you don't have the knowledge it is useless,for example, an experienced user I would say go in 2d and identifies the map-injection phase and before it is in control but you don't have no idea what the injection phase and then...........
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
I msport, however, in any case, every unit has his own way of exclusion, then usually you only exclude the management, so if you really want to delete the actuator there are other maps to be modified and the address change.
PS on this ECU? it seems to me it is not indicated MPPS why? try to lock them in writing...I Think I prefer the Cock.
I understand, thank you Faith
Quote
