I try file Ori of this ecu FGP (photo) opel corsa 1.3 mj 2003

[ugoboss]

Sorry why? both mpps that cock I have read a file from 448 kb when the golds that I found on the net, always sw 1413x586 are 452 kb. Thanks

your beds are in serial, while those from 452kb are read in the bdm.

[Errecinque]

But according to you, can give me problems in writing in the serial?? Someone has a gold bed with mpps??? Thanks

[cinqueturbo]

But according to you, can give me problems in writing in the serial?? Someone has a gold bed with mpps??? Thanks

To be cut.. Email the files that Tello settle...

[Errecinque]

To be cut.. Email the files that Tello settle...

Thanks cinqueturbo. I attach here the ori why? not ? my but I think it is correct, and the file that is read by the car that was already? state moddato previously (among other things, if you give me an opinion as the marelli does not know, and I'm studying now, I would be grateful).

TRAVEL 1.3 01246JO01D 55196353 1413X586.rar

[cinqueturbo]

Thanks cinqueturbo. I attach here the ori why? not ? my but I think it is correct, and the file that is read by the car that was already? state moddato previously (among other things, if you give me an opinion as the marelli does not know, and I'm studying now, I would be grateful).

TRAVEL 1.3 01246JO01D 55196353 1413X586.rar

Here you go the file ori-cut 448Kb..
The mod is not a granch? in my opinion.. missing several lim.the couple and maps, also method mod debatable..

[Errecinque]

Here you go the file ori-cut 448Kb..
The mod is not a granch? in my opinion.. missing several lim.the couple and maps, also method mod debatable..

Thanks, reading the long topic Marelli Mjet Impariamola I also noticed I that lim especially those rails are missing as well as the rail fixed to +130 I don't know how useful it is for the rest I don't have even put it but I want to check for the good of the whole as soon as I have time.

So in summary if I want to riflashare the ori I write that I've cut you. If I want to try to improve the mod already? existing I still have to work on that and riflasharla directly as the ecu recognises me only the file 448kb. Is that right ?

[Errecinque]

Here you go the file ori-cut 448Kb..
The mod is not a granch? in my opinion.. missing several lim.the couple and maps, also method mod debatable..

whereas, the tool (the cock v54) works well because I have rewritten three times, the file that was there before in the ecu and is shared all three times.

The problem is this: I read the file already' mod from this opel corsa 1,3 70cv marelli 6JF trying to improve it. from the existing mod I adjusted the various maps in the ecm driver and added out of the driver mod 2 maps limiters rail with a bit of 775 and torque limiters described in the guide to the marelli is present in the network. written my mod without any error, but the machine does not start and I do not understand the reason (codes injectors are the same as in the diagnosis, both before and after the scriptures). I wish someone would tell me what I touched or set wrong because it happens all of this. Thanks. I attach an existing mod on the car that works and my mod that is not part

Running the 1.3 mj 70cv 6jf.rar

[cinqueturbo]

whereas, the tool (the cock v54) works well because I have rewritten three times, the file that was there before in the ecu and is shared all three times.

The problem is this: I read the file already' mod from this opel corsa 1,3 70cv marelli 6JF trying to improve it. from the existing mod I adjusted the various maps in the ecm driver and added out of the driver mod 2 maps limiters rail with a bit of 775 and torque limiters described in the guide to the marelli is present in the network. written my mod without any error, but the machine does not start and I do not understand the reason (codes injectors are the same as in the diagnosis, both before and after the scriptures). I wish someone would tell me what I touched or set wrong because it happens all of this. Thanks. I attach an existing mod on the car that works and my mod that is not part

Running the 1.3 mj 70cv 6jf.rar

but the ecu is recognized? The id towel ago?
try with this file if you can write..