Results 1 to 9 of 9
  1. #1
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    708

    bmw 120 erratic idling cold

    This evening I ? entry into the workshop of a bmw serie1 2.0 d year 2007 , with the customer complaining about a minimum not so much adjust to the cold.
    I state that I have not done any checks just a quick diagnosis to see if there were errors in the diagnosis and ecu engine I have all 4 glow plugs burned , then 2 permanent errors on the muffler ( the cio? dpf ) and the other 2 that I miss.
    My question ? as ever with these errors, especially of the dpf does not turn on the light engine?
    It may be that they have put your hand to the ecu, or even better, deleted the dpf?
    Or other suggestions?

  2. #2
    THE AVERAGE USER
    Date Of Registration
    Sep 2014
    The resort
    Ancona
    Messages
    115
    Attention that on some bmw diagnosis give errors on the glow plugs, even if they are good. For? you should check it out yourself.
    If all 4 burned the problem to chill and definitely the one with the problem

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    708
    ok for the glow plugs, however, tomorrow I do a good check of everything, but I don't understand why? this problem on fap but engine light off?

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Sep 2014
    The resort
    Ancona
    Messages
    115
    Not ? rare bmw to have the fault codes present and the malfunction indicator light engine is turned off. The BMW n47 engine or 204d4?

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    708
    it is because

  6. #6
    THE AVERAGE USER L'avatar di baraldino
    Date Of Registration
    Mar 2013
    The resort
    Modena
    Messages
    207
    If you get errors on the glow plugs check out good why? often jumps the control unit that the command
    in those on the tester bosch I seem to remember that there is the possibility to slightly vary the flow rate at start-up, and record the rpm's to a minimum
    as it says in Mikigor often the Bmw did not light the lamp ie
    OT:
    the other day ? past a colleague with a 120D to make a diagniosi and for testing purposes we had staccato swirl and egr (both position command)
    6/7 errors and light off
    To force that Bmw customers say that they don't have many problems
    IF YOU ARE UNCERTAIN PLEASE OPEN

  7. #7
    BEGINNER
    Date Of Registration
    Mar 2017
    Messages
    3
    Hi, Michele !!!is Roberto a new writing, I read this an old problem that you had, were you able to solve it? I ask this because I have a BMW 320 D engine n47 2008 and some day, when the engine is still cold I have a slight erratic idling that lasts for a maximum of 3 min. a minimum of 1 minute. after that everything is perfect, I have noticed that when it is irregular, the motor of the valves, swirl it works by zipping and unzipping, no fault code, glow plugs and ecu plugs are new. I removed the manifold and I washed montandogli a new motor to control the opening swirl ,now I feel more brilliant is strong but always has that minimum a little dancer for the first minute after cold start. when it is hot, has a minimum perfect. I HOPE YOU CAN GIVE ME SOME ADVICE OR SOLUTION.
    THANKS

  8. #8
    THE AVERAGE USER (OF)
    Date Of Registration
    Jul 2012
    The resort
    ascoli piceno
    Messages
    285
    Citazione Originally Written by Roby.za Visualizza Messaggio
    Hi, Michele !!!is Roberto a new writing, I read this an old problem that you had, were you able to solve it? I ask this because I have a BMW 320 D engine n47 2008 and some day, when the engine is still cold I have a slight erratic idling that lasts for a maximum of 3 min. a minimum of 1 minute. after that everything is perfect, I have noticed that when it is irregular, the motor of the valves, swirl it works by zipping and unzipping, no fault code, glow plugs and ecu plugs are new. I removed the manifold and I washed montandogli a new motor to control the opening swirl ,now I feel more brilliant is strong but always has that minimum a little dancer for the first minute after cold start. when it is hot, has a minimum perfect. I HOPE YOU CAN GIVE ME SOME ADVICE OR SOLUTION.
    THANKS
    controls the egr

  9. #9
    BEGINNER
    Date Of Registration
    Mar 2017
    Messages
    3
    Hello Guidotacco, to be honest, my first doubt was the EGR, so I disassembled it and checked vivsivamente and I found only a light soot, so I cleaned and reassembled but ! it had the same defect, so I thought I'd close the passage of gas towards the collector plate in place of the gasket, but !! the same irregularities. then I decide to connect the Texa x clear errors generated from the closing and I can not find.( perhaps it's not disconnecting all the connections and the vacuum pipe has not felt the obstruction), however, an improvement I found when I did a reset of the EGR valve, decreasing by at least 2 minutes, the erratic idling. what do you think??? I look forward to your advice.Thanks

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •