Problem with the egr off Ford C-max

[mikyrace82]

Hello all, I am struggling with deleting the egr on a Ford C max 1.6 tdci 90hp why? faulty but I can't seem to delete it with the classic mod of the two humps brought to 0. Made with Time, leaves a bit incorrect. Normally on edc 16 works, but here I do not want to know. I can not bring up the warning light failure but the drive if the egr does not work it goes into recovery. Who I can? help? I attach the mod file and the link to the ori.
http://www.professionalchiptuning.ne...5&d=1416338598
mod:FORDCMAX1037386985egrOff.rar

[Mikigor]

You have to delete the dtc. If you do not have the equipment to do so, please ask at the service of the staff of the forum

[michele30]

Then what ? your problem that needs to be in recovery?
egr closed well, I did one about 2 months ago the same mod in the pi? capped with a sheet , the machine turns without having to have any problems.
how do you not bring in the light, before you gave your failure of a valve or what?
not ? that you have a problem in the electrical part of the valve

[mikyrace82]

the valve ? fails...making the change to the classic of the 2 humps I only have the benefit that I did not lights on the instrument panel, but the car goes into recovery...linking the diagnosis to me from the error of the egr malfunctioning.

[ugoboss]

if you want to try that way, but that will not assure you of anything, because when ? route the electrical part ? difficult to exclude it.

[mikyrace82]

if you want to try that way, but that will not assure you of anything, because when ? route the electrical part ? difficult to exclude it.

ok I try just takes me back to the car.

[Mikigor]

Eliminating the dtc you can also detach the connector from the egr valve

[ugoboss]

Eliminating the dtc you can also detach the connector from the egr valve

if the car is in recovery, as he says, clearing the dtc does the light comes on but the machine goes into recovery the same.

[mikyrace82]

Eliminating the dtc you can also detach the connector from the egr valve

I'm sorry, but how can you? deleting the dtc I don't want it to fail?

[Mikigor]

Of these I made with the connector unplugged and it works well. I can't download the file, otherwise
You could take a look myself. Otherwise, contact the assistance, you will see that they will give you the right solution