Page 1 of 2 12 LastUltima
Results 1 to 10 of 12
  1. #1
    THE AVERAGE USER L'avatar di eobdexpression
    Date Of Registration
    Dec 2013
    The resort
    Mascali
    Messages
    170

    Problem Luca Stanca Nissan Quasquai 1.5 Dci Siemens Sid 303

    Hi to all I would like to kindly information and, possibly, if some good soul would help me with respect to a luca stanca a nissan quasquai 1.5 dci 110 hp as after excluding controls with the software Once the car is well mapped and whatnot, but every now and begins to exit from the exhaust continuously white smoke, as if still incorporates that the fap was active, and then goes into the part in regeneration, even if the body does not c'? no malfunction indicator light fap even why? the software also removes the dtc.....Now the point ? if someone maybe could help me to tell me the precise addresses to be reset in addition to those that time ago, or directly to postarmi the file defappato correttamente...............Thanks in advance to those who I aiuter?........I look forward to answers from someone hoping to resolve......I attach the original file, the mod only with luca stanca, and the modified one with the defap...........Reading ori nissan qashqai 1.5 dci 110 hp siemens sid 303.rarNissan qashqai 1.5 dci 110 hp mod luca stanca siemens sid 303.rarNissan qashqai 1.5 dci 110 hp mod step 1 luca stanca siemens sid 303.rar

  2. #2
    THE AVERAGE USER
    Date Of Registration
    Sep 2014
    The resort
    Ancona
    Messages
    115
    If you bring patience tomorrow you watch it. However, time on these units is not doing a complete job.

  3. #3
    THE AVERAGE USER L'avatar di eobdexpression
    Date Of Registration
    Dec 2013
    The resort
    Mascali
    Messages
    170
    Citazione Originally Written by Mikigor Visualizza Messaggio
    If you bring patience tomorrow you watch it. However, time on these units is not doing a complete job.
    You many thanks, I look forward to the quiet anz? that you are helping me and I thank you in advance goes well tomorrow, not c'? care;-).........Anyway immagginavo even if not by I have tried to reset a few bits manually, but with poor results not knowing precisamanete gl addresses out of the driver for the luca stanca complete this sid 303.Anyway, I look forward to your response tomorrow and I repeat to you again thanks a lot in advance....

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Dec 2012
    Messages
    138
    Citazione Originally Written by eobdexpression Visualizza Messaggio
    Hi to all I would like to kindly information and, possibly, if some good soul would help me with respect to a luca stanca a nissan quasquai 1.5 dci 110 hp as after excluding controls with the software Once the car is well mapped and whatnot, but every now and begins to exit from the exhaust continuously white smoke, as if still incorporates that the fap was active, and then goes into the part in regeneration, even if the body does not c'? no malfunction indicator light fap even why? the software also removes the dtc.....Now the point ? if someone maybe could help me to tell me the precise addresses to be reset in addition to those that time ago, or directly to postarmi the file defappato correttamente...............Thanks in advance to those who I aiuter?........I look forward to answers from someone hoping to resolve......I attach the original file, the mod only with luca stanca, and the modified one with the defap...........Reading ori nissan qashqai 1.5 dci 110 hp siemens sid 303.rarNissan qashqai 1.5 dci 110 hp mod luca stanca siemens sid 303.rarNissan qashqai 1.5 dci 110 hp mod step 1 luca stanca siemens sid 303.rar
    In the meantime, forgive the map ori, and try to see what happens...pu? be that you have ruined any injector. Have you checked if when you smoke in the diagnosis gives you that is doing the regeneration of the dpf?
    I await your

  5. #5
    THE AVERAGE USER L'avatar di eobdexpression
    Date Of Registration
    Dec 2013
    The resort
    Mascali
    Messages
    170
    Citazione Originally Written by Four Visualizza Messaggio
    In the meantime, forgive the map ori, and try to see what happens...pu? be that you have ruined any injector. Have you checked if when you smoke in the diagnosis gives you that is doing the regeneration of the dpf?
    I await your
    Hello four while you're comfortable that the machine already? checked with the file ori is less smoke but the same does it just because? mechanically the fap ? removed the problem is on the bit to be cleared for the luca stanca quiet and thanks to the intervention

  6. #6
    THE ACTIVE USER (FO) (OF) L'avatar di legendaryslave
    Date Of Registration
    Dec 2012
    The resort
    RAIANO(AQ)
    Et
    44
    Messages
    1,985
    I think that the dpf was not removed correctly ecce because it makes the smoke
    while the others are still talking about us, we have already solved the problem
    GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Sep 2014
    The resort
    Ancona
    Messages
    115
    Done. Let them know

  8. #8
    THE AVERAGE USER L'avatar di eobdexpression
    Date Of Registration
    Dec 2013
    The resort
    Mascali
    Messages
    170
    Citazione Originally Written by Mikigor Visualizza Messaggio
    Done. Let them know
    Many thanks Mikigor for now it seems everything is ok ;-)

  9. #9
    THE AVERAGE USER
    Date Of Registration
    Sep 2014
    The resort
    Ancona
    Messages
    115
    Go quiet, I have made several of these. Hello

  10. #10
    THE AVERAGE USER L'avatar di eobdexpression
    Date Of Registration
    Dec 2013
    The resort
    Mascali
    Messages
    170
    Citazione Originally Written by Mikigor Visualizza Messaggio
    Go quiet, I have made several of these. Hello
    Then surely I can go quiet ;-)

Page 1 of 2 12 LastUltima

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •