Opinion the Map Alfa Mito, 1,6 JTDM 16V 120CV EDC16C39

[jack91]

hi, you can take a look at this file if it is done well? the data in the file was the alfa mito 1.6 mjt 120 hp 573-121

defap.zip

[jack91]

that over and done with ecusafe
and this here with timedpf volta.zip

[jack91]

no one can help me?

[jack91]

that are limiters of fumosit? that indicates the ecm?

[thekid]

I have done several cars these with Time and has never given me trouble. Of ecusafe I trust a hair less

[ake85]

[QUOTE=cinqueturbo;86212]Or seen the points that I referred to.. so just to be clear?
Out of the driver can you tell me something?
the cio? dinners need to make it move or just the driver?[/QUO
In my opinion the couple ? changed bad I would give more? and, above all, turns ir? high not need starting from 1000 rpm ( and then if a single couple I can I change it always in 2d )...a limiter rail ? wrong value too low if by 322 points to the rail pressure, you can't give 322 points also to the limiter...you are opening times of the injector should be a good percentage!