Bmw 330D E46 2001 automatic error Ecm titanium

[Fabiuz]

The same error is mine, not having ever had a 330D automatic 2001 I don't know if is a bug with this version of the ecu or what.
You could try to load the drivers that I know what the Rover 75, or other car that has the same control unit of the 330D and the same serial final..
I don't know how to map it so...

[sportknight]

the mpps has a different way to read(probably only reads the tables)then you probably are not able to align with the driver and error,reading it with the cock, I noticed for example that the reading of the tables't find the driver,reading the whole map is the driver automatically

however, these are also easy to do by hand in 2d without driver if you have a bit of experience,but without experience I do not think that you will do it easily..

[Fabiuz]

Both FULL Read that in the K-Line partial always 48k bytes law. Tried + times.
The key to the contrary does not recognize the ECU ID F1.
My bosch EDC16 instead reads 1024Kb 1MB.
On these I have said that ? normal EDC15 read only 48k bytes.
Then I am a novice.
I need only raise the torque and the turbine. Not interested in consumption, but the power and the hp pure...

If some wants to have fun with Winols to make a map boost on the turbo I is the feeling of pleasure on the 330D

[msport (exil77grande)]

Hello to tt.
I read a 330D with the old Bosch K-line 4.0 pre restyling 187cv 2001.
Well I have it but the original map. Then launch ecm titanium I select Bmw 3 series 3.0 TD 187cv 0.804 to memory the code.
The Ecm at this point it tells me unable to use the selected driver. The driver contains errors... How do I proceed?
My 320D l I read it ? written without problems, but the ******* restyling with the ECM16...

Use X to read and write the ECU Mpps v13 original alientech NO clone. Therefore the hw I'm looking for.

I do not know that mpps is alientech.

Both FULL Read that in the K-Line partial always 48k bytes law. Tried + times.
The key to the contrary does not recognize the ECU ID F1.
My bosch EDC16 instead reads 1024Kb 1MB.
On these I have said that ? normal EDC15 read only 48k bytes.
Then I am a novice.
I need only raise the torque and the turbine. Not interested in consumption, but the power and the hp pure...

If some wants to have fun with Winols to make a map boost on the turbo I is the feeling of pleasure on the 330D

In this forum we are used to help in the limits of the possible, so if someone is before me, and I'll mail you the addresses you need, you can then edit it in 2D but the jelly is ready, if the e-mail if you need a mod file c'? our service files online by sending a ***** to info*professionalchiptuning.net

[Fabiuz]

I bought Ecm titanium together with the cable from alientech.to
So I suppose that even the Mpps to be produced by them. Or they make the Sw and hw are only resellers can? be.
The BMW 330D has broken the control unit of the automatic transmission together with the clutch X which has demolished... No map for now. Just wondered,help X the mod in 2D, which I never did.
That said you can? close the rear

[msport (exil77grande)]

I'm sorry, but the thing to me is intriguing history of a lot,alientech that sells mpps?
watch that it is impossible,moreover you bought from a dealer in your area or where?
the titanium version?

[Backgroop]

I bought Ecm titanium together with the cable from alientech.to
So I suppose that even the Mpps to be produced by them. Or they make the Sw and hw are only resellers can? be.
The BMW 330D has broken the control unit of the automatic transmission together with the clutch X which has demolished... No map for now. Just wondered,help X the mod in 2D, which I never did.
That said you can? close the rear

The images posted by you above are of the ECM 1.61 the version that runs on the network and have all of them, then you have not purchased by alientech.to, but from a dealer who has sold the mpps + software

[Fabiuz]

L I've taken to Rome by a workshop that is only mappings and ? dealer alientech. On the DVD I read Mpps v. 13.02.
After explaining to me the various galletto the tricore etc... I must be recommended for my needs l Mpps and it was at the price that it was an original product. Not the usual clones found in the 35-40€. I paid a lot of +. Including adapter for obdI etc...

[Backgroop]

L I've taken to Rome by a workshop that is only mappings and ? dealer alientech. On the DVD I read Mpps v. 13.02.
After explaining to me the various galletto the tricore etc... I must be recommended for my needs l Mpps and it was at the price that it was an original product. Not the usual clones found in the 35-40€. I paid a lot of +. Including adapter for obdI etc...

The mpps or the cartech the azzienda that produces the mpps has never launched the versiobe 13 in fact, it is a veraione developed the network.. or china..
the alientech sells its tools such as the kess v2 or the k-tag, but cineserie and various things she has never dealt with.. all that we can display in our workshops logos alientech or another.. trusted a riventitore professional does not sell equipment, poor as mpps

[msport (exil77grande)]

excellent observation of backgroop to the sw 1.61 crack,regarding fabiuz if I were you, and I really bought a mpps clone, and a titanium crack from a rivendito official alientech paying a lot of money when talking about the hw that take a maximum of 80€ shipped, and a sw that looking on the net you will find free contact really alientech.to report it.