Help map opel corsa

[ecutano]

Raga hello , I need some advice for this map , they are not pleased with the performance , the machine is good for? I was expecting a higher increase , what do you think ??

Z13DTH
W0L0SDL.............
MAREL0100.
HW03A3137S15
3137S151..

[explode82]

then we have a shortage of torque limiters,injection times are made very badly as I see it, and start from the beginning and too much at low load,doesn't it ? been done the rail and with the pedal you can? do much much better

[ecutano]

then we have a shortage of torque limiters,injection times are made very badly as I see it, and start from the beginning and too much at low load,doesn't it ? been done the rail and with the pedal you can? do much much better

Hello explode82 , do you mind if I indicate the beginning of the missing map ? Thanks

[explode82]

see according to me if you want to learn you have to try and do it alone,however you can route as by the spirit of the forum,a torque limiter that is not the fact is, after closing the egr ,and ? very similar to the 2 that are one behind the other,then returns the original time and rifalli how do you think the righteous do? leave the first 6 curves ori, then redo the better the pedal.............

[ecutano]

see according to me if you want to learn you have to try and do it alone,however you can route as by the spirit of the forum,a torque limiter that is not the fact is, after closing the egr ,and ? very similar to the 2 that are one behind the other,then returns the original time and rifalli how do you think the righteous do? leave the first 6 curves ori, then redo the better the pedal.............

I've made some changes , see what you think?

[explode82]

for the rail you started too soon parts a couple of corners later,and toglici a couple of points where you gave 10 and 11,the turbo ? ok, and also the limiters even if one is still 1, but you need to adjust the injection timing

[ecutano]

for the rail you started too soon parts a couple of corners later,and toglici a couple of points where you gave 10 and 11,the turbo ? ok, and also the limiters even if one is still 1, but you need to adjust the injection timing

Which would be the final limiter , I do not see him ! postresti give a little help in the pi? ?

[explode82]

it is, after closing the egr

[ecutano]

it is, after closing the egr

And this ??

[explode82]

no one ? the management of the egr is still after and ? only one ? equal to 2 consecutive neighbors