Page 1 of 3 123 LastUltima
Results 1 to 10 of 26
  1. #1
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    708

    check the map 320d 150cd

    I made some changes to this map and I would like to know what you think of it.
    already loaded on the drive and does not satisfy me so much of that? I don't seem so bad compared to the original, can be?
    what do you advise me to do?
    here is the map
    File Allegati File Attachments

  2. #2
    ACTIVE USER (OF) L'avatar di magi1984
    Date Of Registration
    Jul 2012
    The resort
    Cisliano (MI)
    Messages
    1,529
    the map ? really very elementary, the cio? you touched on the maps right, starting from the right revolution for? in the wrong way.
    you gave 15.9% increase in fixed in all the maps of the accelerator, the injection time that the ecm calls injection zoned, and in the torque limiters
    the rail have increased by 50 points, the cio? 5 bar

    tries to give increases in pi? gradual, starting, for example, from 10 to up to 20% in the maps accelerator
    injection time go from 5 to 10%
    rail incrementalo del4 or 5%
    turbo pressure del6 or 7%
    torque limiters go from 20 to 25%

    c'? a torque limiter out of the driver at the address e82b4 and also to e7ca6
    [COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]

    [CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]

  3. #3
    Administrator L'avatar di admin
    Date Of Registration
    May 2012
    The resort
    Eculandia
    Messages
    708
    If it is your first map, I would say that as a beginning, not evil,follow the advice of magi1984 and you'll see the results
    Unshared knowledge remains an end in itself.

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    708
    do you say that ? for what, then, does not excites me so much of the mod. what have I done?
    I make the change and put the mod

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    708
    here I am, I made the changes with the tools will help you have given me, I hope I did well..
    how is it going now?
    File Allegati File Attachments

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Nov 2012
    The resort
    messina
    Messages
    478
    for me it's not ? evil, I would have increased only a little bit at low revs am ? just a matter of taste, congratulations

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Jun 2012
    Messages
    329
    also I think the map as before can go well. maybe too high the pressure rail. try it and let us know.

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    708
    the rail pressure does not ? was increased to 50 bar, or no? ? too much?
    es:
    in dec I ori 13000 and that mod ? 13500 so are the 50 bar or more?

  9. #9
    THE AVERAGE USER
    Date Of Registration
    Jun 2012
    Messages
    329
    damage to nn do but I, I + 300nr nn salgo. personal taste but as it goes on the car ?? you've got to try??

  10. #10
    THE AVERAGE USER
    Date Of Registration
    Nov 2012
    The resort
    messina
    Messages
    478
    Citazione Originally Written by michele30 Visualizza Messaggio
    the rail pressure does not ? was increased to 50 bar, or no? ? too much?
    es:
    in dec I ori 13000 and that mod ? 13500 so are the 50 bar or more?
    there are 50 more, it loads the map and let us know

Page 1 of 3 123 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •