hi, I saw that for some cars the mpps says to correct the cks before writing the program itself by chance? the same to do it, but does anyone know how to do it? another thing if I edit the file with the titanium and I have the driver, corrects him directly?
then in the field when mpps is said that the automatically calculates the sw processing does not, however, when mpps tells you that it does not automatically make it the sw but only with exact driver,in the case of the titanium when you upload the file, and then you charge the compatible driver for the same file in the main screen in the bottom right you will find a written checksum, and then in the riquadrino a number that would be the family of the file if there is the number ck calculates him if you find spots, no, then you need to make sure that the face of the programmer in writing.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
Nn I cpt ? to the contrary?but then the car that already? I wrote how I did that?
I'm sorry, what is' on the other hand,if mpps says that he is ok if mpps says that it is him who is doing it? the sw ok?Originally Written by andreap
if in the bottom right out the number of the family means that calculates the ck him if they come out of the dots do not calculate, of course with corresponding driver clear?
I don't know if I have the herringbone bad, or you have to re-read carefully my previous message.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
all cpt....
to calculate the cks with mpps when it doesn't automatically have to do in this way:
click on the icon cks and open the file .mod to load, after a few seconds it re-opens a window where it tells you to indicate where the file is located .ori, select the file .ori and the cks is calculated by the program, after that you can write to the file .mod
I hope I have written so including
transparent
thanks
useful info for me
I don't understand? why? will ask you to open the file .ori to calculate the cks .mod
Because it is assumed that the file ori is the one that you've read with MPPS and from them is the comparison and then make the necessary corrections, as you noticed when you do a read with mpps also tells you the cks
forgive me, Gerard, but perhaps escapes me something
you want to upload the file .mod with mpps
and this file you need the cks
that centers the file .ori from which you started (by downloading it from the ecu) and its corrispndente cks ?
note that I ask you, of course, is not to convince you of something, but why? in short I would like to write for the first time on the ecu via mpps, and I need to understand a little more?
thank you
Write permission
Quote