Marelli NEVERTHELESS, 6F3/G1 HW04P 3645-G191 GP 75 HP

[pippo65]

The problem is that I do not have the file of my golds to write about new,to them I should open it and read it in bdm,which if possible I would like to do it as a last resort
there is an alternative'

[pippo65]

The problem is not the dpf, or dpf, the ecu's are the same, combia, only the sw; your problem is that you want to mount hw04p on hw03p, and it is not possible, you will start ever, tomorrow I have just a little time can you please post the sw 90 hp without dpf for hw03p for hw04p so fun you have a little to do the tests.

Hello,watch now the tests I've done a tot,but all gone wrong,thank you in advance if placed in the software, but I can not download it because I don't have enough
the active messages.
A question,but if you could find a beckup full control has been equal to my original,scodificando the eeprom solve it?

[pippo65]

No, in addition to the backup you have to find a hw03p, the scodifica that works 100% in flash, on some sw versions if scodifichi the eeprom is not a part of.

Then I wanted to try!!!
Now I find one with HW-03P and then I try,if I need I do feel.
Meanwhile, Thanks for the help.
Hello.

[pippo65]

The hw03p you can find the punto classic, the panda and the gp from 2006 to 2009, is 75 to 90.
By trial and error you learn.

Therefore, it is not mandatory that both a 90 hp,the important thing is that it is a 6F3 HW-03P, if I understand correctly.

[pippo65]

Yes, I already told you, the marelli are characterized only for hardware, as software, you can caricargli what you want.

If your ori is hw03p you can only put a hw03p, it does not matter if 75, 90, with dpf or without, the important thing that is hw03p, then the software loads what you need.

For example, from 2006 to 2008, the fiat engine 1.3 has mounted only hw03p, according to the power and presence of the dpf have loaded the sw specific, but the ecu is the same for all models.
From 2008 to 2011 have mounted only hw04p.

Ok perfect,thanks for the clear answer.
Hello.