Problem recoding injectors fiat idea

[giuseppelosi]

Hello all,
my idea 1.9 jtd I have just replaced the injectors with 0445110 119 derivation stilo jtd 115.
I would like to try to enter the code of the injectors through multiecuscan,but on the injector part of the code above,there is nothing.
the car goes in motion and runs well,but at minimum has some tap, and the technician fiat has said that if there is no code in addition to the bosch,it is the injector scodificato.
how do I check?

[leo_sg]

according to me it is not problem of coding, are regenerated ones that you put it?

[giuseppelosi]

No, dismounted from the car that had stopped for a while, but rimessata always covered.

[giuseppe89]

I don't think that encoding issues give this kind of errors...or at least I never happened up to now,I would recommend you put some additive in the diesel and see if it improves or not...common rail injectors in general are delicate and sometimes standing still can be damaged

[giuseppelosi]

This l I have already put in the yard, in fact in the first full I have recommended Dell 2 stroke oil for lubricants in a full-bodied injectors.

[vitomick]

It is not a coding issue according to me

[leo_sg]

try to get them to check.. fix the injectors, and it does not see right?

[passione motori]

Hello all,
my idea 1.9 jtd I have just replaced the injectors with 0445110 119 derivation stilo jtd 115.
I would like to try to enter the code of the injectors through multiecuscan,but on the injector part of the code above,there is nothing.
the car goes in motion and runs well,but at minimum has some tap, and the technician fiat has said that if there is no code in addition to the bosch,it is the injector scodificato.
how do I check?

Hello, first thing you know that your car's cv and family of engine control unit 2 you know that the codes had the old injectors, 3 119 bosch coming from the stilo jtd 115 hp then the engine control unit EDC15C7 not have codes that the IMA, when all types of common rail injectors will remain still for a while, the ideal would be to dismantle them and make them double check at the counter, often you just need a clean with ultrasonic, 4 instead of using oil to 2T in the diesel filter, empty you can fill it with cleaners of excellent quality, put it in motion and let it turn for 20 minutes and after you go on the road to try the car.......

[legendaryslave]

I confirm 119 are not encoded

[ugoboss]

Hello, first thing you know that your car's cv and family of engine control unit 2 you know that the codes had the old injectors, 3 119 bosch coming from the stilo jtd 115 hp then the engine control unit EDC15C7 not have codes that the IMA, when all types of common rail injectors will remain still for a while, the ideal would be to dismantle them and make them double check at the counter, often you just need a clean with ultrasonic, 4 instead of using oil to 2T in the diesel filter, empty you can fill it with cleaners of excellent quality, put it in motion and let it turn for 20 minutes and after you go on the road to try the car.......

the one that says passion engines is the truth, these injectors are for families, and not have the code the IMA, when you make these changes a bit of knowledge we would like, of course the "technical" fiat..............