Compatibility Ecu Bosch EDC16C39

[tranky]

Hi guys,
I need kindly some info after research ****** has not provided any illumination.
I have a Alfa 147 1.9 jtdm 120cv that mounts the edc16c39_882_005 which has had severe problems that caused me burning, fuel pump and injectors.
To repair it, it cost me more than replacing (as always in the computing environment with the pc.. the mirror!).
My question is:
Having a edc16c39_965_(I think 724) can be mounted on the car instead of the 882 ? if yes, which procedure?
Currently it is connected so much to try it, and the drive part without a problem, but I don't know if it is from the place the eeprom in any way.. I'm not an expert unfortunately..
I look forward to your feedback
Thanks

[blackwolf76]

If you have connected and the car starts without problems, not create errors in diagnosis, I do not see what could be the problem.

In addition to this, if I give the number the full hardware your provider and compararti the compatible control units.

[tranky]

Thanks for the swift response (really, thanks because I am without a car waiting to make decisions and spend money that I don't have).
FIAT HW is 55206270
The ID Number is 9374D
BOSCH HW is 0281012882
BOSCH Number SW is 1037379005
BOSCH ID SW is 3444
(I wanted to attach the img of mpps with all the details but I do not have permissions, active...)

Available I the control unit :
BOSCH HW is 0281012965
BOSCH Number SW is 1037379724 (not verified)

[tranky]

Thanks for the swift response (really, thanks because I am without a car waiting to make decisions and spend money that I don't have).
FIAT HW is 55206270
The ID Number is 9374D
BOSCH HW is 0281012882
BOSCH Number SW is 1037379005
BOSCH ID SW is 3444
(I wanted to attach the img of mpps with all the details but I do not have permissions, active...)

Available I the control unit :
BOSCH HW is 0281012965
BOSCH Number SW is 1037379724 (not verified)

Ah.. I forgot to say that the control unit 965 was on a 16v and mine is 8v.
(I don't know if it changes something because I have the ORI 8v of the controller 965 that in the case of ie firing and fanQ!).

[blackwolf76]

find one of these and go quiet:

[IMG]https://i.gyazo*****/c7265d2881baf062f9ca4d8e50fff190.gif[/IMG]

[tranky]

Excellent !!!!
Thanks!

[alex68]

find one of these and go quiet:

[IMG]https://i.gyazo*****/c7265d2881baf062f9ca4d8e50fff190.gif[/IMG]

black the compatibility l have extracted from esitronic?

[blackwolf76]

Yes, esitronic.

[ugoboss]

if you put it on, and part buol say that the ecu is scodificata, otherwise it would not be starting, at this point put in the back up your and try to spin it.

[tranky]

Ugoboss, it is obvious that scodificata but does not recognize anything in diagnosis, it is not compatible with my car and only starts the engine.
I purchased a unit a mirror to my on the baya (hopefully good).
For the scodifica how to proceed with this model ?
I need BDM or through the map with mpps and any CarSoftware or Nyo4 or I don't know what else ?