Fiat fiorino 1.3 mjet p0234

[159sportwagon]

Good evening to all. Today, and got a fiorino 1.3 mjet of the year 2008. The diagnosis gave me the error code p0234 that would be the pressure sensor. After that the changed. But the error ce.what do you think

[legendaryslave]

watch the barometric pressure and turbo pressure with the engine off and see if they match

[cinqueturbo]

But the parameters them to the visa's you?
however, pi? a had the westegate route, take the vacuum gauge or a tubiccino and pulls to see if it holds..

[gick]

not only that, look at the values of pressure obbettibo and the pressure measured with the diagnosis and have a look when you deviate, perhaps you only have the geometry p? seized that ? slow to risponere and solve cin a spray from cleaning the egr with the engine running

[ugoboss]

I don't know if the forint ? the same, but to me ? happened on a doblo' which had broken the rubber sleeve on the intake right near the entrance of the intake manifold and I trusted that bug them, it checks well.

[gasluc01]

follow the advice of colleagues also test to see if the westegate gets all his race, otherwise to the problems of variable geometry

[costa68]

Hello, if you can, e-mail of the parameters that we evaluate them together, also the air mass, it is important for this dtc. If after the checks that you have indicated the colleague does not resolve, check the status of the egr valve.

[tezzero]

check out all the pressure hoses and arias valve west...

[franco-elettr]

begins to see if the westgate moves when put in motion

[autoracing]

Usually and the westgate that does not open..