Hello all, I have a Fiat Ducato 2.3 diesel 120 hp Ecu EDC16C39 with engine light on and DTC P0638 valve throttle control. Trying to exclude the only DTC to the middle of no more than 3,000 rpm. Does anyone know how to exclude the control of this valve? I am attaching the file ori.
but have you disconnected the starter motor??? usually I exclude the dtc on and take them off the butterfly by removing only the circle of the throttle in, but I leave it plugged in and mounted the electrical part,..... you have done so???
No, cos? I had not tried. For? I have now written to a file to try and seems to work with everything connected.
Hi all,a strange curiosity? why? do you want to disable the butterfly valve electronically?
I too would like to know if it works I would like to try to see the consumption why? we have installed
A cng system on a 3000 mjet and the tubes of the injectors are placed before this butterfly
Lightning:
Typically they break you disable to not replace it
Mikigor:
in this case you just disable the egr and the throttle is not will work? more but when you turn off the engine continura to close, and make its function "antusquotimento"
Frantik3:
And dtc so breaks the connection
IF YOU ARE UNCERTAIN PLEASE OPEN
Hello mikigor ,the installation of the cng system and complicated? The map for you, or gi? ready?
exclude throttle control, and it is good
the map you by the landi renzo. you may receive only the parameters. it is now in the test I wanted to eliminate precisely the egr valve.
great baraldino I try and let you know thanks
I confirm that the solution I tested works.
Quote
