failure of airbag

[nicospl]

hello to all
I have my friend, the owner of a stylus that has a problem with the sensor, passenger airbag.
you have never solved these problems?
there is an emulator something to bypass the weight sensor?
thanks in advance

[sno74]

the systems are two or emulator or remove the ecu read the dump of the original and with a sw change without presence with a cushion, then write in the control unit and on.....

[nicospl]

which emulator do you recommend??

[sno74]

clearly the dedicated one, and like the other see you....

[bernardo943]

if type through some diagnosis program disabiti the sensor ..?

[sno74]

the dump ? stored in the eprom of the ecu must be unsoldered read the file in bin content, and then changed I don't know if you can? to make the diagnosis I would have never heard....

[fuorigiri]

save in the diagnosis that I know is not possible, I have made a lot of re-writing the file

[carlo abarth]

on some units I through reading the dell drivers but you have to read the serial to see what kind of ecu'!!!

[afortunao]

C'? a way to emulate the resistecia carpet, remember that ? can emulate for busy or empty ? preferable to emulate as busy, so that in the event of an accident activates the passenger airbag.

They also sell emulators, as you know, at a price of 70-80 €. Of course, pi? economical to buy a couple of resistors, but also their work and skill.

If someone is in need, when you find the tutorial I get stuck here. Greetings

[egs]

I confirm, the diagnosis is not you can? to exclude the sensor weight, only via file, which to me is not always ? managed, maybe a couple of times, or you can emulate the weight sensor with the emulator. the price for? ? pi? low, at least the ones that I use....