Hi I wanted to ask if possible to read the ecu of the smart 600
With the galletto v1260 serial and what precautions to take about the pin 24, which goes to ground ??
Hi I wanted to ask if possible to read the ecu of the smart 600
With the galletto v1260 serial and what precautions to take about the pin 24, which goes to ground ??
Hello
You can read the flash of the ecu smart 600, but only in boot mode, pin 24 connected to ground, follow the instruction to que by the software.
For scribire, can do in the obd, no boot-mode.
Sorry could you be more clear I use the galletto clone version 1260 I id I press ok read to me and tells me a number of things to do type metteree remove the pin 24
From the control unit close to the jec ec written order of the pins?
you have to take the boot on the pin of the internal flash to the ecu.
ugo ---- president A.E.P.
Hello
Also the other option, can make the Id, and you find each file ori with iguale version of hardware y software, can escribire in the obd without problem, without opening the ecu.
Right id do grandee!!
Write permission
Quote