elm 327 compatibility opel

[luigigtc]

hi guys my first post, I wanted to ask you, I took a week in my area elm 327 usb version 1.5, then I have a opel astra gtc 1.3 90hp 2007...and so far I have not found even a program in the network that can tell me perfectly certain values, such as the pressure of the turbo.
I used *********** 3.6 and it works fine tried it in the car of friends, my opel instead serves a general-purpose software, I used to scan the master but always the value of the turbo not the from, scan xl pro and have had problems since loading the pid allowed by the ecu, the dashxl gauges go crazy and go up by yourself, also trying it on other brands I've tried other soft but always the same...

I am looking for a software similar to torque for android I've tried a friend's and perfect pressure gauge turbo in real-time and working, but only for android I would try one for pc

thanks a lot guys

[mafani]

hello si c'?something for the opel to use with elm ,if I remember correctly, this is the vaux check

[luigigtc]

thanks for the info, there have been bad for the fact that I had found the soft good scanxl pro but I can't set it that in any car I put it on, indicators such as rpm, speed, and pressure turbo when I start the monitoring indicators move up and down from just type something that sends them in conflict

[mafani]

I don't know why? so,I've never used scanxl ,use the elm only with ***********

[motorsport]

I would buy opcom with a few euros and solve all the problems!

[luigigtc]

thanks for your answer, I have similar problems with other soft such as scantool touchscan and *********** only this if and the piuu full of all of me from this annoying problem, has anyone tried elm327, paired with scanxl pro or professionale_

[legendaryslave]

let it be you toys your only salvation if you do not vui spend ? an autocom I see the sluzione the most complete and professional

[luigigtc]

then I let it go l-elm, and take something of more quality? in the network on youtube see video of diagnosis on vehicles equipped with this interface 327 may be some error setting?

guys I have a question -- so I uninstall and delete it...someone has problems to use with elm 327 1.5v scanxl professional? the gauges, which turns vlocita and boostvacuum give problems with flickering or up and down only?

legendaryslave, at the end, after many tests and research on the opel only goes to the OP COM, I do not understand why? perhaps the interface ? CAN BUS high speed? and the elm is not ? able to read everything perfectly, so have a look and maybe take quest OP COM