Salve, that you may know there is a sw that is coupled to the ELM327 allow you to make the diagnosis agricultural tractors?
Or only diagnosis tools, the officers of each house?
Salve, that you may know there is a sw that is coupled to the ELM327 allow you to make the diagnosis agricultural tractors?
Or only diagnosis tools, the officers of each house?
lost that the communication protocol is the same of the cars and then with a scan tool would you be able to see some of the parameter entering the obd generic with regard to the officers I know that texa has something as they are the client, but you need to a tractor or you have to do service to different means ?
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
Was more? for curiosity? to see if I could track my tractors with elm327.
New Holland for the diagnosis official use DPA5 that also allows you to update the various software of the control units.. currency exchange, lift... but unless you are a dealer or repairer the cost ? excessive.
It seems to me that the Texa to do something for the diagnosis but not ? with my case.
and nauturale diagnosis official will do but I try to test the elm I would do but you can only see dtc I think
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
Prover?... I made an adapter Obd J1939 9-pin.. saw that they do not have the obd... the cable ? only 3 wires, I wired the k-line...
But it should be enough, no?
it is just that the colleges, k, I think they can and feed the elm
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
I tried it today, as the software I used ScanMaster ELM but fails to connect to the ecu...
By selecting the ALPHA... it seems to connect using the protocol KWP
From the information in the system I have values and I would say that some of them are actually right... like :
ECU hardware Number 0281020057
ECU hardware version number 49
ECU software number P_400
ECU software version number 878
In the error codes DTC I have 3 errors..
P012B Turbocharger/Supercharger Inlet pressure sensor circuit Range/Performance
P0145 O2 Sensor Circuit Slow Response
P0149 Fuel Timing Error
If it is real.. what kind of errors are they?
don't lose time with the elm does not solve this type of problems in diagnosis. simulates the reading of the DTC, but are fake.
how do you know? how should you do to diagnose the tractors? c'? some diagnosis clone?Originally Written by alex68
You know autocom cdp+ supports tractors?
Write permission
Quote