I purchased a Jeep grand cherokee 3.0 crd 2005 WK and the old owner gave me only one key and unfortunately it no longer has the card with the pin code to duplicate it.
I need to retrieve the pin code, I have the interface elm 327 which I use with android and torque, which obviously does not give me any information about it.
Do you know if exists some software that was combined with the elm 327 I do to read the pin code of the key so that I can take to duplicate it??
Women and the engines give the best of 90°
do not believe those who duplicate keys to be more equipped and prepared than you??
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Definitely, but where I went to carve the key ( where duplicate all kinds of key and remote controls for the car ) they told me that they do not duplicate. Otherwise I would have paid without question.Originally Written by aldinik
Also wishing I could duplicate it from me and add the key to the immobilizer of the car, because I bought a diagnostic software specific to my car ( WiTECH ) that allows me, among other things, it only asks me the code 4-digit pin that the old owner has lost.
In the Jeep, they asked me 48 Euros excluding vat for giving me the code, and frankly having already purchased the diagnostic software with interface, and having already by the time the ELM 327 I was wondering if I could somehow I could get the code.
Unfortunately, the WiTech does not allow you to read it.
Women and the engines give the best of 90°
to extract the pin code you need or the interface is the obd reader, memory type UPA and is to be read from the internal memory of the BSI or in some cases even from the key desolder the memory
the elm in this case, unnecessary
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
I thought that being an OBD interface could also do the elm with some software in particular. I have the Witech with its interface, specific diagnosis for Jeep/Chrysler, you may also duplicate the keys but strange thing not to read the code pin boh?
Women and the engines give the best of 90°
I found a software that could perhaps do in my case. Appcar-Diagfca https://appcar-diagfca*****/en/suppo...rand-cherokee/
anyone knows? I confirm that also reads the pin code from the key ??
possible that there is no other alternative? that are not porgrammatori eeprom with relative dissaldazione of the chip from the board.
Women and the engines give the best of 90°
I think that unfortunately you will have to resign myself to the idea of read pincode via obd with stuff from 4 money to come in, and I also found myself in the same situation with a peugeot 207, otherwise I could not reprogram the remote control with lexia and I went in the dealership, with 30€ I have obtained the pincode from home mother, and I avoided smadonnamenti different between smontaggo installation, reprogramming, etc, etc,
Alex
Women and the engines give the best of 90°
Quote
