Map Info v 18

[freddyecu]

Hello all I wanted to know if the version v18 you have to trim the file to 1 mb to write the Hammers 6f3? Thank you in advance

[cinqueturbo]

It puts us 4-5 minutes and you're sure of what you do..

[freddyecu]

The old mpps v13 does not read this ecu, you can only write, and to do so you need to cut the file from 2 mb to 1 mb

[cinqueturbo]

then?? you have asked for more and I advise you to read and write with the same tool that takes a little..

[freddyecu]

No I have to use the new that is the v18 and I wanted to know if you have to cut the file as you did with the old version, or you write the whole

[cinqueturbo]

Dear freddyecu will be at the time, the amaro after dinner.. or simply we do not understand..
you take an online file to 2048Kb and cut them to 1048Kb to write with mpps the old version..
with mpps you mentioned is not needed... there is no need to download files online, because it reads directly from the ECU that is present in 4-5 minutes... no VR, but Real..
the work and the write.

P. s. you have to be careful only to choose the appropriate protocol from Can - K-Lan.. risk of losing the encoding injectors..

[freddyecu]

Thanks, this was what I wanted to know... I have fRe a Fiat idea with 90 hp

[sportknight]

in order not to risk with the encoding injectors, or you read them first with a diagnosis, or you read them with kess,work with mpps and then enter them again with kess

[cinqueturbo]

v18-law, the entire e2prom by obd2 with the function multiboot