opinion on the egr is the dpf off alfa 159 1.9 150cv

[micheleyr6]

hi I wanted to know if I have done well in this file,the egr is defapp off alfa 159 1.9 jtdm 150cv 138 889

I enclose ori and mod

[tranky]

hi I wanted to know if I have done well in this file,the egr is defapp off alfa 159 1.9 jtdm 150cv 138 889

I enclose ori and mod

from what I can see looks like you.. what did you use for defappare?
Upload it and check the clogging..

[micheleyr6]

thanks for the response..actually the car was already defappata...I think that has been done with ecusafe..
however, the owner complained of not having the dtc,I are limited to restore the dtc is the bit clogging(at least I think)
I am attaching the map that was loaded,at least I could know if I did well.

[Errecinque]

thanks for the response..actually the car was already defappata...I think that has been done with ecusafe..
however, the owner complained of not having the dtc,I are limited to restore the dtc is the bit clogging(at least I think)
I am attaching the map that was loaded,at least I could know if I did well.

There are dozens of threads around on this ecu. As for the entire fiat group, €4 with edc16c39 for defappare just put it to 0 the bit of the switch setting up (in 8 bits), and FFFF is the bit clogging (in 16bit) . Without touching the other. Guaranteed and tested

[micheleyr6]

thanks errecinque ... but if the load so it goes well anyway?
I was interested to know if I have reactivated well the dtc..

[micheleyr6]

guys anyone can give me a look to check if they are the ones the dtc to be put in order..thanks.

[cinqueturbo]

It is the DTC's are active.. do reset or replacement with a diagnosis, and write..

[micheleyr6]

thanks cinqueturbo..
I have available multiecuscan to reset I go to adaptation,then what would be the item to select?
restore the functions of self-learning if I want to make only reset right?

[micheleyr6]

if lon I write directly what could happen?