Flash pro v

[Gianpy80]

Hello guys, I just bought from dimtronic their last product (unlike the others should not be rebranded, but their production) is the flash pro v. I have taken it full of kit triprox (edc 17) and passtool for the bmw.. What do you say? I threw almost 5000 euro? The kit includes of course a year of updates (the next is not compulsory and costs 300 euros per year) 15 files (that I need to just because the majority do them by myself) and technical assistance full. Of course we talk about the master interface..

[passione motori]

but have you tried to open your tool?

[Gianpy80]

I can not open it, there are the seals for the warranty.. I arrived only today, and I still have it installed and tried. Before this I had the flash pro IV (I had given loan to use a client to him they had sold but had never learned how to use it) for what was nothing more than a kess v2 original but rebranded dimtronic. About this I have ensured that I can do 90 percent of the edc 17 with antituning directly in serial, and the other through the triprox in the boot but with a maximum of one wire to boot.. we'll See.. Among other things should also do the simos mounted on the audi 1.6 tdi directly into the serial

[passione motori]

then for the old version, there is who it is addressed to a consumer association and a legal, because from what you have read in the network was not the original but a clone, maybe you have different version but I say to you you + soon, if you post a photo you will understand what you have sold precisely..........

[ugoboss]

I'm curious as I also see two photos of the tool, and I'd love to see a photo of the screen of the sw, thanks.

[mafani]

I would like to see it too this tool

[aleg]

I have the flash pro 4 and I can say that it is a clone even if they say no now, I have proposed the flashpro5 but not l I considered it, I did cheat once *****and assistance I have done a couple of file f ap off in which I had no problems ,to the performance leave much to be desired

[blackwolf76]

According to me you have taken a large bin... I'm sorry for you.

A friend of mine has recently bought, and these pseudo-sellers have trimmed a clone of the magpro, with which I know that should even be in conflict with legal.

You advance that does not read edc15, edc16c2 of the mercedes and the simos 2.1 does not do...

In addition to my friends have sold to a master that actually reads encrypted files on which you can intervene and is bound to them for the modification of the file, then it is stuck as a slave...

According to me there are better ways to spend a few thousand euros...

[ugoboss]

Hello guys, I just bought from dimtronic their last product (unlike the others should not be rebranded, but their production) is the flash pro v. I have taken it full of kit triprox (edc 17) and passtool for the bmw.. What do you say? I threw almost 5000 euro? The kit includes of course a year of updates (the next is not compulsory and costs 300 euros per year) 15 files (that I need to just because the majority do them by myself) and technical assistance full. Of course we talk about the master interface..

but why these questions are not the fairies before spending all these money, 5000€ are really many, and is it really a sin to throw away money.

[Gianpy80]

Guys I flash pro IV cel I have and I assure you that it is not a clone.. Even works online only and you update constantly.. And a Kess v2 is very normal but it's original and, above all, is the Master because 90% of the machines I have mapped and defappate from me.. from them I only able to take a map test on a 1.3 multijet and the subsidiary was made well enough.. then I did remove some dtc's and I have not had any problems. For this I decided to take the flash pro V.. Today I install and active then in a week I have to make a bmw x7, and the volvo v50, both with edc17. Then I tell you how it went... I'm attaching the photo of what I got and a screenshot of the software..

IMG_20160318_215609.jpgscreen.jpg