strange problem with 59f

[zi-pij]

Good morning

are struggling with a fiat Punto 2002 and the ecu 59f M3 HW603.
The machine no longer recognizes the key (the key route because the fall)
Then I run a scodifica total with a dedicated interface, made the reading after the programming, and tells me "Immo off".
Strangely, the machine does not start and remains the light of the CODE on!!!!
How can this be?
Can someone give me directions?

Thanks to all

[walter_ie]

I don't think you can get it to start so, because the total on the 59F does not work very well, you for case on that Point you have the tachometer and the needle of the water temperature?

[zi-pij]

Hi Walter and thanks for the reply.
The car has the tachometer and the needle of the temperature of the water

[walter_ie]

Alt forgive me!!!! I do mess myself every so often!!! Your in the box the code under the steering wheel??? If you're staccala after you riverginato the ecu see that should be in place then!!

[walter_ie]

Sin, then you have to put an emulator to keep the ecu virgin. If not I had you could choose a change that left virgin the ecu. But if you do so you lose operations, tachometer and water.

[zi-pij]

so I have to make it virgin and put an emulator, right?
Could you tell me which emulator, even in private?
Thanks again

[walter_ie]

Test to see if it has the box code under the steering wheel!!! That version of them it seems to me that has it still!!! Also because I don't know where to advise you to take the emulators

[zi-pij]

no you do not have the box for the Code

[walter_ie]

But try to redo the key?? You have no way of reading the body to pull off the queue and write to the transponder??

[walter_ie]

Noooo!!! Unfortunately I do not know how to help!! Let's see if there is someone who knows more than me and maybe knows how to help you or advise you on any emulator. Anyway, in the network, you should find something!!