Hi guys, for those who want to have fun in hear make pop pop a edc15 here we explain how to do it!
So first thing you must decide what number of rounds you want to enter the rev-limiter, let's say you decide to set it to 4000 rpm.
well now you have to take the map of the torque limiter in 2D and take the ramp attacked just before the curve of the limiter, this ramp represents the Y-axis of the map, and that means they are RPM.
now navigate to the 4000 rpm on this ramp (if the ramp were not present in the rpm that you chose at the beginning is not there problem, take the first value that it brings us closer, for example, if there were 3800 and the 4200 will take 3800 and the increase to 4000)
once you have found these 4000 rpm, take the BP the next and the set of 10,15,20 laps in most of the spins that you have chosen, then, as in the following example has been 4000 the BP next we set it to 4010 or 4015 or 4020, considering that the more you increase the more slow sara rev-limiter.
once this is done you return the table and the values in the table after 4000 rpm you set them all to 0.
loaded the map and have fun