hi wonder if ? can take a look at this exclusion of the dpf+ egr ....what do you say.....I enclose a file ori+mod.
hi wonder if ? can take a look at this exclusion of the dpf+ egr ....what do you say.....I enclose a file ori+mod.
Originally Written by max75
we kindly ask you to open the discussion in the section to fit,otherwise you risk not receive any help,also a very very important is to put the most info possible on the way.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
right, I forgot .....since I made the exclusion with ecusafe I thought that this was the right section.....pardon the next time the lighthouse more attention..
sorry the car in question ? a alfa 159 1.9 mjet 120 hp with fap.....I wanted to know if anyone has had good results......
you advance with ecusafe you should not have problems, but you need to check in diagnosis % of clogging that if it was a 1000% must make a small change in the 2d nothing of that, and if you have used some sw to exclude the egr should be ok,go tranuillo.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
thanks msport.....what do you advise me......... the physical removal of the dpf do I do after .....you have checked for clogging, which % must have for a good result......then the variation in 2d....? yet to understand.....thanks
there is need,you can easily make the physical removal,if in case you have the clogging of the 1000% we will gladly help you to solve it.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
so if lascioal 1000% of clogging is not comprometto nothing ... I mean light on..etc.. etc
go quiet!!
even if you leave it at 1000%, however, nothing happens. Usually you change to be precise, why? affect the operation of the machine
Write permission
Quote