Results 1 to 9 of 9
  1. #1
    THE AVERAGE USER
    Date Of Registration
    Oct 2013
    Messages
    109

    Fiat Grande Punto 1.3 75hp error U1706

    hi all!
    Are two days that I fight against this problem...
    describe briefly the problem:
    the car comes with the ecu tampered with, I can start the bike by fixing the ecu and doing the partial...
    can I encode the injectors and forth without problems, except for the battery completely to the ground.
    Change the battery in and out the problems...I have no idea what they have done.
    diagnosis errors are the following

    Ecu engine:
    U1706 Can Network (NCM-NFR)

    Body Computer:
    U1701 Ncm
    B1053 NCM inertial Switch
    U1715 Node Yaw
    U1706 Brake System
    U1702 electric Steering (NGE)
    U0019 Line B-Can

    Framework tools:
    U1019 Can Cable
    U1700 Central Computer
    U1701Ncm
    U1706 Node Brake

    In the framework remain flicked the lights on: ABS,ESP, Brake and anti-skid
    Power steering does not work
    I tried to rialineare all the ecu but nothing to do
    Checked all fuses all ok...
    to someone ? gi? experienced something similar?

    thank you for your attention!

  2. #2
    BEGINNER
    Date Of Registration
    May 2015
    Messages
    6
    hello, I try to start the bike and disconnect a battery terminal if the engine is switched off and the alternator is not charging and you d this problem await news

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Oct 2013
    Messages
    109
    performed test alternator all ok
    tried with various diagnoses to perform network alignment
    texa everything is ok
    brainbee node is not configurable
    wow error alignment

  4. #4
    THE AVERAGE USER L'avatar di fuorigiri
    Date Of Registration
    Nov 2012
    Messages
    186
    hello I do not do, with its as and was advised to disconnect the battery with the engine running the alternator should be checked with appropriate instruments
    If you are never wrong means you're not solving a really difficult problem. This is a serious mistake

  5. #5
    THE AVERAGE USER (OF)
    Date Of Registration
    Nov 2012
    Messages
    1,280
    I fully agree, these tests you could do on the 127, but not even enough to have a tester....!! however, check the power supply and the masses on the ABS, and check the CAN Line from the ODB.

  6. #6
    THE AVERAGE USER (OF)
    Date Of Registration
    Nov 2012
    Messages
    1,280
    Sorry, OBD.

  7. #7
    THE AVERAGE USER (FO) L'avatar di passione motori
    Date Of Registration
    Jul 2013
    The resort
    Lazio
    Messages
    607
    Hello on these cars often damages the earth cable on the gearbox since ? too short, it seems that it is ok instead of damage

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Oct 2013
    Messages
    109
    I update the post:
    wiring body-abs body-power steering completely rebuilt...and the problem doesn't it ? most presented
    thanks to all

  9. #9
    THE AVERAGE USER (FO) L'avatar di passione motori
    Date Of Registration
    Jul 2013
    The resort
    Lazio
    Messages
    607
    ok, the important ? risolvere...............

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •