solution adapters digiprog 3

[Alessio93]

ST CAS CANON25
blue 9 26
blue/white 10 35
black 13 12
red 25 34


ST 1 clip 3M 923650-08
1 1
2 2
3 3
4 4
19 5
6 6
5 7
7 8


ST 4 clips 3M 923690-08
1 1
2 2
3 3
4 4
19 5
6 6
5 7
7 8


ST 37
yellow 9 yellow
green 10 green
white 25 13
yellow 25 2
brown 13 1


ST 33
yellow 10 6
green 9 8
brown 13 1 blue
grey 25 10
white 25 9


ST 2 Dil 8
1 1
2 2
3 3
4 4
5 6
6 7
7 5
13 8


ST 55 TYCO-M1026-S502
green 17 green
yellow 18 yellow
white 25 11
brown 13 8
grey 25 7


ST 11 9695 9695/50
yellow 9 1
green 10 15
white 12 1 12
brown 13 11


ST 36 AMP 20pin
yellow 9 yellow
green 10 green
white 17 blue
brown 13 black 16
yellow 25 15
white 25 14


ST 29 AMP964825
yellow 9 yellow
green 10 green
brown 13 brown 17
white 25 1
yellow 25 2


ST 10
green 9 18
yellow 9 15
white 12 3
brown 13 1


ST 20 TYCO-M1026-S502 AMP92850-2
green 9 5
yellow 10 1
white 12 15
grey 12 16
brown 13 10
green 22 1


ST 12 Box
yellow 9 1
green 10 2
brown 13 3
brown 13 4 (R 1k0)


ST 49 PCB
green 9 green
yellow 10 yellow
white 12 white
brown 13 brown


ST 39 TYCO-M1026-S502 TYCO-M1026-S502
brown 7 brown
yellow 9 yellow
green 10 green
white 25 white
brown 13 23 11
green 25 24
white 25 22
yellow 25 20


ST 51
brown 13 brown
green 17 green
yellow 18 yellow
white 25 white


ST 26 TYCO-M1026-S502(white) TYCO-M1026-S502 AMP1-828917-2
green 9 12
yellow 12 23
yellow 12 16
white 12 4
white 12 22
brown 13 3
brown 13 24
yellow 22 8


ST 21 TYCO-M1026-S502 Peugeot (grey)
yellow 9 1
green 10 2
white 12 13
yellow 12 9
green 12 17
brown 13 11


ST 38 yellow 9 yellow
green 10 green
brown 13 brown
brown 13 2
white 25 14
yellow 25 22


ST 23 AMP343865
green 9 14
yellow 10 13
brown 13 3
white 25 2
grey 25 5


ST 32
yellow 9 yellow
green 10 green
white 12 white
brown 13 brown


ST 35
yellow 9 yellow
green 10 green
brown 13 black
grey 17 blue
white 25 red


ST 7 TYCO-M1026-S502 Peugeot (3pin)
white 10 2
brown 13 17
yellow 15 1
green 16 3
white 25 4


27TH ST TYCO-M1026-S502
yellow 10 11
green 9 9
brown 13 blue 1
white 25 14, 16


ST 46 TYCO-M1026-S502
brown 1 brown
yellow 9 yellow
green 10 green
brown 13 19
white 20 white
green 25 17
white 25 1


ST 19
green 9 8
yellow 12 5
brown 13 4
white 25 7


ST 31 AMP 1-963 616-1
yellow 9 1
green 10 2
white 12 9
brown 13 1


ST 34
blue 1 blue
green 2 green
yellow 3 yellow
orange 4 orange
black 5 black
brown 13 brown
red 25 red


ST 6 BMW
green 9 19
yellow 10 14
brown 13 15
white 12 20


ST 22 TYCO-M1026-S502
green 9 23
white 12 25
grey 12 24
brown 13 26
yellow 13 13


AMP 1-963 616-1
ST 43 green 9 16
yellow 10 15
grey 12 17
white 12 9
brown 13 18
pink 13 10


ST 47
white 1 white
yellow 2 yellow
brown 3 brown
blue 4 blue
black 5 black
red 6 red
grey 7 grey
green 19 green


ST 42
grey 1 grey, non-polar standard capacitor 10nF
white 6 blue
green 9 green
brown 13 black
yellow 20 white
white 25 red


ST 41 AMP 964825 - green AMP 964825 - blue
green 9 28
brown 13 9
green 17 black
yellow 18 green
white 25 1
yellow 25 23


ST 28 AMP-929650-2
yellow 9 yellow
green 10 green
brown 13 11
white 20 white
yellow 25 10
white 25 5


ST 9+15 AMP1-963553-1(24pin) 191972530B(28pin)
yellow 4 13
R-10k 9
green 10 7
white 10 2
brown 13 5
brown 13 9
brown 13 1
yellow+R 14 4
green 15 3
white 25 1
white 25 13
grey 25 17


ST 48




remember that the graph should be used to open leads and locate the pin right no the color good job to all

[mobilservice]

If I understand correctly, you have to open the plug, locate the numbering on the connector and you are not aware of the coloring but bens? of the position.
Forgive me but one thing I do not understand!
take a look at a cable, example 42
the pdf manual of my digiprog ver 4.92 mentions: black,red,green, grey. Whereas, I can see the points are connected on the pcb of the dial and not on the connector to which I do not know on which pin should be connect;

my cable has the following colors: red (PIN1), black(PIN 6), brown (PIN 9), black (of the second cable to PIN 13), orange (of the second cable PIN 20), red (of the second cable PIN 20)

the change reported by you says:
ST 42
grey 1 grey, non-polar standard capacitor 10nF
white 6 blue
green 9 green
brown 13 black
yellow 20 white
white 25 red

now my question is as white 25 red what colour are referred to in my cable? agree that I must follow the numbering on the connector and not the color, but on the pdf the color grey as to which numbers should match?
it would have been much more? clear if I could upload my pdf files but I need to reach the famous 80 to be enabled.

Could you kindly help me? I'm stuck and I can not solve my dilemma
A big Thank