issue control unit air bag

[Alessio93]

hi to all guys I would have a control unit trw 51719092 331374 the air bag and has a memory 24lc04bi I did the crash with carprog I mounted the unit on the car and I still got the 2 lights are on what should I do ? I have given a proxi alignment I confirm ? thanks to all

[silven]

It is usually on the fiat group have to do the proxi alignment,we need to see, however, in the diagnosis of errors are you from if error type failure to recognise the ecu or a similar problem ? on the proxi if instead, you find the ecu is locked or the like may be the crash wrong..

[Alessio93]

I am attaching the file that is read with the willem eeprom and a 24lc04bi the unit in question and a trw 51719092 331374 someone I can? help for the crash? thanks to all

[filetuning]

Careful that carprog ? good for certain types of work, but it does not read well, or sometimes not law to fact, especially, the 24c04 and the like give you wrong readings that once reprogrammed you bust all the way only ? find a file read well, and put it back in..
Ps..the alignment is only if you put a file with the same sw and hw but of another vehicle, usually if you clean up the original file and does not need any alignment proxy

[sisco]

Hello Alessio in the database I have these files, see if you can help

[Alessio93]

I reprogrammed the 24c04 with willem ? I mounted the control unit result light off no error in the ecu !!all sorted many thanks sisco you are a friend

[sisco]

I reprogrammed the 24c04 with willem ? I mounted the control unit result light off no error in the ecu !!all sorted many thanks sisco you are a friend

ok I'm glad that you were able to resolve