flash spasnions 29cd016 replaces ST 58bw016'?

[obd75]

I will explain the why? of this question: pegeout 207 1.4 hdi he didn't do all the tests and I see that the ecu was opened but not backing then oxidized,I try to disossidare and now part but some of the pin of the spantion are going to give in,I have the ST.
have you done this?
another thing to the n?hw ? 523 sw 170,which is not present in the driver of the titanium,there are 523 but different sw and indicate the flasks ST. in the case according to you if I find a 523 with the ST I would be able to use it with only internal data e2prom or write complete?
or just do the partial configures to the first hang-up?
thanks

[obd75]

I forgot: I was able to read in bdm with the cock,why? the bdm100 does not recognize the ecu. type what happens with the 1.3 mjtd

[legendaryslave]

they are interchangeable between them, proceed

[19antonio192]

the bdm100 not recognize it because it can't read the spansion. I on an ecu 1.3 or executed in replacement of a spansion with a st without any problem