buy mpps clone v13.02 (v13-v12) for edc16c9 and edc16c35

[bmw320cd]

hi to all
recently I approached the chiptuning,and I threw down a mappetta that ? I arrived at the v4 version (after many improvements that I have made through recommendations here on the forum)... well missing some other retouching but sooner or later I am blessed file, do I need to write it...
and here is the problem...
my main car ? a opel astra h 1.7 cdti 2006 with 101cv without fap that has edc16c9, while the second car that I have and a 320d 150cv e46 coupe 2006 edc16c35 I dedichero as soon as I finish and write the file .mod that I have prepared for the astra h (I have to copy the values in .ori with sw and hw is the same)....
that said a friend of mine,told me that with his mpps clone v12 (white cable transparent without box) has made several 320d e46 always with edc16c35,reading and writing the file to 1mb (this eoc has file 2mb full,but he has never given problems)ecm gave him all the maps with the file from 1mb...he also made his 535d e60 with edc16c35 always with the mpps clone by reading and writing the file to 1mb without ever having blocks or problems ...
I know for a fact,that mpps clone and other programmers the edc16c9 of my astra h, write only, but do not read it... so I should find the file .ori on the web of my and change that and then write it right?
bdm and tour, I did not feel anything, afraid to mess something up and I lack the necessary equipment..
thanks to early

[betrescudan]

usually use your original file for modifficare...then you do well to buy a galleto, or a kess,legere your flash,right-click the mod file and rewrite it...strange that you can not read your edc16 with mpps v12...

[rodcraft86]

I would avoid the mpps, especially on edc16, take a cock v54 ? much better, for the speech c9, some write only why? the total read ? only possible via the bdm port by the serial read only a small part of the file which is of little use

[bmw320cd]

I'll explain, having not even a programmer,I immediately concentrated work a file .gold taken from the web, for my car astra h, only with number, hw and sw is different, to understand how to move and how to change it... now that I finished working on the file, should I take my .ori and simply copy the values that I have in v4.mod and ? immediately made the map...
now, however, my file .ori I read from serial port can not be read,but only to write, and this happens with any programmer...
I wanted to buy a programmer clone for me to write and read the edc16c35 (bmw 320d) and edc16c9 (astra h 1.7) but maybe it can't be...

I would avoid the mpps, especially on edc16, take a cock v54 ? much better, for the speech c9, some write only why? the total read ? only possible via the bdm port by the serial read only a small part of the file which is of little use

but I'm sorry then, my friend with his mpps clone has given the pay for a magpro official as well...
this with mpps clone made us 535d,320d, X3, a4 2.0 tdi all through obd without ever having problems....
and on the 320d has read the partial file (1mb, and 2mb) idem in his 535 (1mb instead of 2mb), them has changed through the ecm with the appropriate driver (opening the file from 1mb ecm allowed to make ALL the changes possible on edc16) and then he has rewritten both the file by 1mb and ? always everything went ok...and especially that performance !!!

[rodcraft86]

I have mpps v12 with box metal ? considered one of the best, I have only rarely used and has never given me any problems, but as speed? not c'? comparison with other tools, the cock v54 and the kessv2 are more? fast and less prone to jams, mpps ? economic and sometimes does stupid things, if you want to risk not c'? problem, the car ? your, I have only recommended in my experience

[bmw320cd]

some to charity... but how do you explain that the friend does all these things with a mpps clone v12 without ever having problems??
watch I am attaching two files that you have read, modified, and then written,with mpps, 535 e60 (edc16c35) and a 320cd 150hp (edc16c31)
from what I've read,the 535 should have the file to 2mb,and if you are not law,and it writes that to 1mb, the ecu should go on the block...well he has re-written at least 15 times to find the performance you want,without ever a lock,bdm, or things like that...
open:

- the 320d e46 with driver B122_881
- one of the 535d E60 with driver B191_597

and you can see how the files are complete and compleamente editable and writable....

map 320cd 2005 150hp 2004 originale.rar

the original map 535.ori.rar

[rodcraft86]

you probably have a clone of a well made and reliable, and the file of the c35 is not necessarily ? 2 mega, the first models had the file 1 mega as the c31, however, I see you convinced and I do not know why? you asked for advice, get the v12 and good luck

[bmw320cd]

has the mpps v12 clone without the box, all in the cable obd color transparent...
not that I am convinced,I wanted to know if maybe there were differences and if there was any way to read the edc16c9 given that it seems that it not be read...
as you can see, the above files are fully functional and have read them with that clone...

[rodcraft86]

the c9 can you? read in full only in bdm, no instrument is the law completely from the obd, I have written and read 3 and in that way, buy the clone as his, and he hopes that it is of good quality

[betrescudan]

the c9 can you? read in full only in bdm, no instrument is the law completely from the obd, I have written and read 3 and in that way, buy the clone as his, and he hopes that it is of good quality

the kess lege always so full obd