Results 1 to 9 of 9

Discussion: problem smart 800 cdi

  1. #1
    THE AVERAGE USER
    Date Of Registration
    Dec 2013
    Messages
    84

    problem smart 800 cdi

    hi to all ? from the day that I throw in the head in this smart 800 cdi ! the car is fine only that after a short pull off the turbo in diagnosis I d? as error turbo pressure high !
    I did the test to put the ori pressure turbo but the error I respawn, I doubt there is a may be the torque limiter too high ? the car and with sequential gearbox !

    I enclose a file ori and mod smart.zip

  2. #2
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    The resort
    Arezzo - Florence
    Messages
    961
    have you tried if ori does not, why? I d? so the idea of the wastegate stuck...

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Dec 2013
    Messages
    84
    hello sandro, the smart 800 cdi does not have variable geometry !
    I tried with the file ori ? the problem persists !
    I found a thing for? , and taking into account the torque limiters of the original , the problem doesn't exist , but I don't understand the why? (the car ? with sequential gearbox )

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Dec 2013
    Messages
    84
    to any of you ? ever happened to you ?
    diagnosis of mi is also as error turbo pressure high

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Dec 2013
    Messages
    84
    guys anyone know give me some advice ?? not s? pi? edove sbattare the head !
    I tried both with turbo pressure that rail golds ! ? the problem persists
    if, instead, puts the torque limiters ori the car is not v? in recovery !!! but why? ? c'? some other limiter ??

  6. #6
    THE ACTIVE USER L'avatar di Backgroop
    Date Of Registration
    Feb 2013
    The resort
    Oppido Mamertina
    Et
    39
    Messages
    1,146
    port ori the bit after the torque limiter 06FFF6 - 070002..
    The patience and virtue of the strong..

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Dec 2013
    Messages
    84
    hello backgroop, I also noticed I that bit cos? in the map, but I've never touched, pu? be modified only ?? and if I try to bring him owers with ecm not me f? do it !! I make the map ? the place

    I noticed that that bit ecm me the only change pu? be ??? but that happens....

    backgroop you know what I noticed the bit to 06fff6, you change from just, as soon as I rise on the injection zoned !! but why? ? will be correllato the two things ?

    even if you mod, the turbo pressure and lim torque that bit you change only !! and I can't bring him gold because
    Last edited by Backgroop; 06-06-2014 to 09:05

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Dec 2013
    Messages
    84
    backgroop pu? but be that ? the area checksum ??

  9. #9
    THE AVERAGE USER
    Date Of Registration
    Dec 2013
    Messages
    84
    I did today try to bring the bit ori ? the car is not starting, so it was like I thought the area checksum
    but then why? v? in the recovery is driving me crazy

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •