info quality gallo

[RTR]

A greeting to all...I have to say that I am writing on behalf of a friend ...bought a rooster chinese of course ...says a v50 ... to make it work when the program and get to the screen must detach and reattach the usb cable, otherwise it should not be done ...this has read a couple of chroma and a corsa d 1.3 mjet without problems... now I ask you because personally I have no experience with the cock you can know in some way if the quality of this tool. .. maybe posting a picture of the ic..I don't know as much as you can say ... he is afraid to write and friendship leans to me ... but to make it more self-nn mi mind... about the outer box if you can serve, and a black square with a led. Thanks in advance

[passione motori]

Hello, this version ? the + economic on the market, to solve that problem is to replace the FTDI, with what has been spent already? ? so if you read any car, if they use it for hobby still might test it on the other car, but you need to work almost daily I do not think it is valid...

[RTR]

Thanks for the reply...as far as the drivers are the only ones with which the work..and he told me that the procedure had it to do because it was the only way to make it run for a matter of relais ..I do not know in detail... as I said the usa just for a few cars but are afraid to write. ... to read goes really well, as I said.... then you tell me that it would be risky to try to write

[passione motori]

B? to rewrite, you must always get in yet, at least on the croma would be a reading BDM if both can do it, then the usual procedures battery voltage drive , pc clean, and reliable connected to 220v, especially at the beginning of the prudence not ? never too much, for the rest of the problem ? in the FTDI already? changed to tens

[angelolsp]

post the photos of the interior I too have a galo to a led with integrated philips, omron, and to date, I have written edc15 pd fiat edc16 edcc16 bmw etc and has not given me problems

[RTR]

Thanks passion motors.. riferiro ... also for the driver even if I don't know where to take them...unfortunately I have to do it myself because of him ? little practical. ..angelolsp tomorrow I try to carocare this photo...

[passione motori]

Best explained that the drivers you need????

[Ross]

The windows driver seems to me to be the same from the 48 to the current 54

[RTR]

first of all, I enclose a picture of the integrated

passion for the driver I don't know you tell me, you said that the problem that I described was for the FTDI

[passione motori]

FTDI v? replaced why? programmed wrong from the house that has assembled....