hi with the help of a little + expert I put on qst draft of the map, I closed the egr and I have done according to me changes very, very soft, can someone tell me the pu? say if the map ? can be loaded on the car and if ? made with criterion?
hi with the help of a little + expert I put on qst draft of the map, I closed the egr and I have done according to me changes very, very soft, can someone tell me the pu? say if the map ? can be loaded on the car and if ? made with criterion?
Last edited by msport (exil77grande); 13-09-2012 at 16:13
damage does not make for? certain things should be arranged according to me.
the required torque during acceleration standard: you can start by 1500giri, parts from the 50% of the no load by 20% and by measured increases, for example from 5 to 14 and not 15%
couple requests for the functionality? sport and acceleration is the same thing suggested above
torque limiter maximum you can go even up to 20%
with maximum torque of the second, third, fourth, fifth and sixth gear incremental as the torque limiter maximum
Pressure turbo you can go up to 160 points, if it also controls the limiter
rail pressure you lift too much, according to me, stopped to 40/50 bar in the pi?.
you haven't touched the deal? fuel injected and the injection time.
you can also edit those two maps if you want to from 50% load to 100%, increasing, say, from 5% to 10% in a phased manner starting from 1500giri
however, if you want to try it cos? com'?, I repeat, NOT DAMAGE IT, quiet
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
excuse me, perhaps I have not indicated the type of car exact, the car in question does not have the sport, and even the sixth gear.
excuse me???give me of you...
otherwise, I see myself obliged to give of her as well I
in the driver, which opens with ecm titanium there are also those maps
attached is an image of the torque limiters for single gear
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
with this map you will not have big improvements ? as if I had mounted an add-on module is missing a lot of things...? true that mod the rail to inject more? diesel? not at the profit that serves the engine... to take a couple and then the power you have to adjust the other maps... the turbo the you could leave pure gold given that you haven't touched other things.. there should be also another map of the rail..
but as ever ? this a map of a 5-speed map for the 6?
and worse yet, the function sport
why? the same sw you'll find him in the six-speed... don't worry about those limiters why? with the map that you did not you will get there never get them to get in on the action..
my goal was just to not kill the machine in the third...and then a board here, one of them ended up here:-)
I don't understand what you mean with:Originally Written by andreap
and then a board here, one of them I ended up here
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
Write permission
Quote