Page 1 of 3 123 LastUltima
Results 1 to 10 of 30
  1. #1
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    Messages
    178

    The problem of the rear windows 147 jtd

    Hi all, some time ago, smontai the battery of my 147 for maintenance and I noticed that when I close it with the remote control close automatically only the glass front and not the rear (before removing the battery closed) how can I fix that? Thanks

  2. #2
    THE ACTIVE USER L'avatar di Backgroop
    Date Of Registration
    Feb 2013
    The resort
    Oppido Mamertina
    Et
    39
    Messages
    1,146
    Hello this is a configuration operation is very simple:
    Enter in the car close the doors and turn on the framework
    lowers at the same time the front windows and keep crushed the buttons for 3 seconds after they arrive at the end of the race
    leave the buttons and rialzali at the same time taking into crushed the buttons for 3 seconds after they arrive at the end of the race
    repeat the same procedure for the rear ones and see that everything will go back to work as before
    The patience and virtue of the strong..

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    Messages
    178
    Thanks 1000 backgroop now

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    Messages
    178
    Can I ask you another question? I have the front windows that are slow... can You? resolve in some way or need to change the electric motors?

  5. #5
    THE AVERAGE USER (OF)
    Date Of Registration
    Nov 2012
    Messages
    1,280
    For that problem, there may be two causes: they may be the guides of the glass that you have consumed and does not slide well on the window, or do you have the motors worn out. First try to spray in the side guides of the glass a little bit of spray grease and see if anything changes...

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    Messages
    178
    Spray grease? And then the glass is not crap every time you get up? Can you explain maybe I didn't understand where to put the grease

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Mar 2014
    Messages
    86
    Citazione Originally Written by fabio Visualizza Messaggio
    Spray grease? And then the glass is not crap every time you get up? Can you explain maybe I didn't understand where to put the grease
    I use a silicone spray in these cases, increasing slightly the guides and the spray on the inside, so the glass is not dirty but it flows very well

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    Messages
    178
    But to guide you to the plastic wand outside? Let's say that in the Fiat 500 are also with the chrome strip?

  9. #9
    THE AVERAGE USER
    Date Of Registration
    Mar 2014
    Messages
    86
    The vertical where there flows the glass

  10. #10
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    Messages
    178
    Aaaaaaa now I understand where the... Thanks for the answers prover? this method

Page 1 of 3 123 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •