Page 1 of 2 12 LastUltima
Results 1 to 10 of 14

View Hybrid

  1. #1
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    Messages
    116

    Fiat ducato 2.3 m.j year 2010

    Hello to all. Can someone tell me the pu? help I have a problem with the ducato 2.3 engine ford cold after a few minutes and the engine is the top and bottom, and some time off as well, but nn and a problem of diesel because just then hot and perfect. I did a diagnosis and I da2 error in p0 (i.e. 401 egr valve and the other p0103 unknown error I went to look at and the air mass meter can you tell me if I do the map excluding the egr to solve this problem appearance response

  2. #2
    THE AVERAGE USER (OF) L'avatar di explode82
    Date Of Registration
    Nov 2012
    The resort
    NAPLES(CRISPANO)
    Messages
    395
    I believe that the defect of the high and low depends on the pi? from the air mass meter,but if you want to make sure and take away the doubt chiudila and see if it removes the defect
    GALLO ORI + KESS V2 ORI

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    Messages
    116
    I had thought to do to the exclusion of the egr valve in the control unit

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    Messages
    116
    But only cold to me once, and success with a daily but it was the pressure regulator pero him as a failure

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Nov 2013
    The resort
    Udine
    Messages
    103
    change the mass air flow sensor

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    708
    I ? capiata a similar thing not on this engine but it was the mass air. maybe you can try with the closing with the map of the egr, but if ? a mechanical defect of the valve does not show anything if ? electric, then something is

  7. #7
    THE AVERAGE USER L'avatar di Zac
    Date Of Registration
    Feb 2014
    Messages
    158
    I first would like to see in what conditions, and the egr,will surely be clean,and then tested the operation,( may also be blocked, and this would explain the fact that the face only cold) then I would go and see the deb... if you want to delete electronically, you have to make sure that it is closed of course....

  8. #8
    THE AVERAGE USER L'avatar di Zac
    Date Of Registration
    Feb 2014
    Messages
    158
    meccanico85 have you solved it ?

  9. #9
    THE AVERAGE USER
    Date Of Registration
    Apr 2014
    Et
    39
    Messages
    95
    change the air mass meter

  10. #10
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    Messages
    116
    I have cleaned the inlet with a product, and at least it is working

Page 1 of 2 12 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •