I try the photos inside the lexia3

[pinotec]

hello to all
someone kindly could postarmi pictures of the inside of the lexia 3.. especially near the connector side obd rear?
I lost a resistance or a capacitor smd... and I do not find it more ..and now the tool does not detect more ecu.

[tecnoracing]

the chassis is ?

[pinotec]

hello techno
the chassis is.. tested on 3 machines... and on all 3 the same defect

[giarras]

I found something see if it goes well, are a bit blurry
http://www.sendspace*****/files/twoj55

[pinotec]

hello giarras thank you for the photos and congrats on the new charge
looking on the net I read that it replaced the ram,but I don't understand if you need to my problem, or the problem that is not recognized by the pc

[giarras]

hello giarras thank you for the photos and congrats on the new charge
looking on the net I read that it replaced the ram,but I don't understand if you need to my problem, or the problem that is not recognized by the pc

thanks,......which sw do you use? we see a p?

[pinotec]

lexia 346.22 and pp2000 23.25

[giarras]

lexia 346.22 and pp2000 23.25

then I do a tour ok?

[pinotec]

ok thx giarrass

[giarras]

ok thx giarrass

see if you can be helpful.
http://www.sendspace*****/files/wv65eh