hi guys, should I buy a programmer to read and write eprom, and in particular, I should use on the ecu iaw 16f , what kind of programmer would I buy, in addition to the eprom of the iaw must be cancelled or may be overwritten ??
hi guys, should I buy a programmer to read and write eprom, and in particular, I should use on the ecu iaw 16f , what kind of programmer would I buy, in addition to the eprom of the iaw must be cancelled or may be overwritten ??
you have to take a programmer-the-counter type willem or other
do a search on the internet type programmer eprom 27c512
with regard to the eprom of the iaw you can not reprogram
you have to take a virgin eprom and write it
there are 3 types
27c512 write once and not gates
27c512 "window" write several times and gates with uv lamp
27sf512 write and gates programmer
hello booster thank you for the information, the 27sf512 I can read and write with willem or other programmers right ??
...
but, this is not ? easy to find in the trade
search (in this section) and read the discussion "erasing eprom"
hello booster thank you for the info I would like to know the last thing, the same controller can I use it also for the 8f ? the mountain always like the eprom 27c512 ? and I could replace with the 27sf512
if you mean you iaw8f
if you look at the data sheet for the programmer tells you what types of eprom and micro does.
I am attaching a screen of my programmer
programmatore.JPG
I don't know I can open the screen , then to the iaw8f can I mount it as eprom the 27sf512, never can you tell me where can I prenderele ?
I have found in china, and I'm testing it on a iaw16f
I have written one with a file that I modified, but I ? on light injection
probably ? the mod file that has some problem
now I have written it with the original file , today I feel good, the car then I'll let you know if ? reliable
hello booster did you find in china ? can you direct me to the site I should take too much time, there have been x reach you ? should be the same for 8f