Hi all, I have a problem with this CAR is not a party to the spy code on esp ABS etc in diagnosis can get to try the most? diagnosis as autocom texa, bosch kts,... At the moment of ignition of the framework comes out and selecting the no fps ...to when you know what can? be? Thank you in advance
Check the mass . Put a cable between the ECU and the body . If part and a "mass" problem . If you do not ? what, you have a problem with the ECU .
Switch inertial?
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
since you can not see anything with the diagnosis,control wires of the yaw sensor under the brake lever to me and success that would not start.
but do not enter all of the ecu? check abs ecu, I have found the oxidized and sent them to tilt the system and the wires on the central tunnel, as it says gero.
let us know
test with examiner to find them something
If you enter all the ECU but not in the ECU
The engine then you have possibly a problem with the ecu
Cos'? examiner? In the diagnosis not only enters into the engine
put another ecu and see if you
Quoto perfectly the problem ? the inertial switch jumped, rearms the whole thing and see that it goes well..Originally Written by cinqueturbo
The patience and virtue of the strong..
Write permission
Quote