Gallo v53 and sagem 3000 clio rs

[nox]

Hi guys I need to do a write up on the clio rs 200cv sagem 3000 can I already? been reading about 1 min without problems? I open this post to know your experiences of writing on this ecu file and the 64 k and titanium, to me, is easily the driver Each your info will be? very useful-have a good evening

[maxsek]

I had a bad experience with this ecu, but with another programmer,then I solved with the piasini,however, if it fails, the write-in obd if you don't have a piasini not the recoveries....

[nox]

Even the jtag v 53?

[fabiovts88]

I know that these cars need to be written with the motor temperature is not more than 50 degrees, and I know that the obd of the clio rs sagem 3000 is not ? wired in the k line

[nox]

Thanks, but these are info that already? I knew what I wanted to know I was if someone on the forum had already? worked on this CAR with the v48 and v53 did the writing, and if there were problems

[gezame]

Hello
Normally, not a problem with the rooster.

[marco_evolution]

Exact with the cock go quiet any version..my Friends, the writing is still with the 1260..? since you have a tool that makes you to jtag I for safety I'd make a nice back up so go even more quiet