I must include in the workshop a new good problem to airbag ecu, I made a diagnosis this morning and gave me the ecu fails, someone has already? put your hands on these units or can you? ripistinare with usual file ripristino.........
I must include in the workshop a new good problem to airbag ecu, I made a diagnosis this morning and gave me the ecu fails, someone has already? put your hands on these units or can you? ripistinare with usual file ripristino.........
strange...
that recovery file you mean?
let's say file recovery after crasch or outbreak drivers I'm afraid that is a fault internal to the ecu and you need to replace it....
ok fine... but if I didn't crash or anything difficult that you ruin...
you to know that you have welded on the machine? etc?
perhaps the solution pi? fast and to take it to collapse and restores the e2p in case you fossino open the drivers...
exactly what I thought it was me for? let's see if someone has already? done something similar....
write down the codes in the ecu and see if around you can find a dump virgin
just to double check...
ok the codes the ecu are 54827585 continental
That I know should not be necessary to replace the airbag control unit in the event of an accident in that car. Look at the case I have one in for repair in the workshop and that I assemble the next week, so before then I can not test since I got a kit airbab complete and I should advance the control unit if the old one ? still good and I do not create errors in diagnosis. You spend the dump, for? I know that I have adequate equipment for the operation.
Last edited by blackwolf76; 05-09-2012 at 23:54
The code of my controller is ok ? this Fiat Bravo - 51827585 Siemens 5WK43641 should mount a 95320 you should read that and then write a dump ...Originally Written by blackwolf76
but are you sure that you need the clear , read e2prom and email the file
Write permission
Quote