Problem reading/writing fiat doblo 1.3 mjet 75hp 6f3

[tidus1985]

Hello all, I am writing to try to solve this problem

Today I had a customer with a doblo 1.3 multijet 75hp 6f3, 3456D471 51843352

I'm going to read the file with my FGtech V53 clone, reading time employee 75minutes, 95% jumps to 100% and the reading is complete, check the file is 0kb, I'm looking for the file on the internet and find the file ori attachment, which I don't know neahce if it is correct, although the ecm recognizes him, I try to write with magpro because I go sure that I have already written other with this but I am missing the file to the micro that I can not find, of course, are unable to read bdm because the customer does not want to.

I read the flash and eprom separated with fgtech using as a driver, the old driver of the 70cv and reads me a flash file of 64 km and a file eeprom 4 kb

I told him that I ritornoare since the fgtech gave me the possibility to write by obd the file ori amended without the file micro but I was sure that it was correct.

I ask you for help if someone can give me a hand to find a reading in the bdm port of the ecu in question complete file micro mcp

Thanks in advance

[ugoboss]

hi tidus, the file you found, including micro, I believe that you could write even so, with the cock, but before the test I would do a backup (if the customer does not want to amen) otherwise extract the micro from a file and write with magpro.

[carlo abarth]

sorry maybe you're not good at soldering or don't have the template..you have a 53 do you tour and you take out the thought..I suggest you to go to the bdm port with the ecu many times in serial mode takes c** fiski!!!

Hello all, I am writing to try to solve this problem

Today I had a customer with a doblo 1.3 multijet 75hp 6f3, 3456D471 51843352

I'm going to read the file with my FGtech V53 clone, reading time employee 75minutes, 95% jumps to 100% and the reading is complete, check the file is 0kb, I'm looking for the file on the internet and find the file ori attachment, which I don't know neahce if it is correct, although the ecm recognizes him, I try to write with magpro because I go sure that I have already written other with this but I am missing the file to the micro that I can not find, of course, are unable to read bdm because the customer does not want to.

I read the flash and eprom separated with fgtech using as a driver, the old driver of the 70cv and reads me a flash file of 64 km and a file eeprom 4 kb

I told him that I ritornoare since the fgtech gave me the possibility to write by obd the file ori amended without the file micro but I was sure that it was correct.

I ask you for help if someone can give me a hand to find a reading in the bdm port of the ecu in question complete file micro mcp

Thanks in advance

[tidus1985]

In fact, I wanted to make it in the bdm, but the clie you did not want to open it up to the ECU. I have, but Schedoni spring and all. A question that I have never done that, that way with ECM estrapol? the file micro from the reading ?

[ugoboss]

this should go well, if everything is ok I have to have a drink.

[fuorigiri12000]

The board bdm and go siccuro.

[motorsport]

Tidus go in bdm,if something happens I have to open ? best nn risk!!

[Alfa159 q4]

In fact, I wanted to make it in the bdm, but the clie you did not want to open it up to the ECU. I have, but Schedoni spring and all. A question that I have never done that, that way with ECM estrapol? the file micro from the reading ?

On these marelli if done well there remains no sign of tampering on the frame, reseal with silicone and you are affixed.
The eye does not see the heart does not grieve!

P. s. the file is 0kb in size ? a known problem on many 53-54 on v48 I never had any of these problems (tested on dobl?, idea and musa 2.5 mb)

[tidus1985]

Meanwhile, I thank ugoboss, now I try to convince the client to work in the bdm, with sti v53 there a way to read these ECU by obd?

[passione motori]

Hello Tidus, I a few days f? I have read and riscritt from the serial with the v53 a dobl? 6f3, reading time is quite long, I can't remember exactly but I read a file 2,560 Kb.
Are you sure of the choice of the protocol that you used ???