Hello guys I'm looking into the file edc16c34 of this peugeot and meeting a lot of similarities, of course with the edc16 fiat group...only that in the maps that titanium called enrichment and acceleration,the first three of the drivers, I don't know what to point out the values in the map, should be the values of torque, but how to read them?
the driver gives me as K64,then divide the values for K and I get the kg of torque?
Last edited by msport (exil77grande); 04-12-2013 at 12:15
C'? the attached file
anyway, the data are
peugeot 308 1,6 hdi 90cv
but I have no interest in this car...but understanding how it works the edc16 psa group.....
thanks
look at the axes, as you can see, the axis 8192 ? pedal, assy, y -, and engine rpm, then identical to c39, conversion factor 0.1, table value in nm, this is true for all maps wide choice in acceleration that you have, all maps pedal, if you see the specifications of the engine are 90 hp to about 200nm maximum torque, and the conversion of that year made the map back, then, to see how many mm3 of diesel are the map 1CFB0E and later, or 1DAD88 and later, it would be from prvare with the diagnosis but to the eye by the values and bp seem to them. I had a fiesta with this engine, but at the time I could be anything so I never informed on that drive, I began to study it a bit now, but put in mind that the positions of the maps are very similar to the c39
Write permission
Quote