Results 1 to 8 of 8

View Hybrid

  1. #1
    THE AVERAGE USER
    Date Of Registration
    Apr 2013
    Messages
    591

    Map Lancia Ypsilon 1.3 multijet 75HP

    place the map of the lancia Ypsilon 1.3 Multijet 75 hp DPF made by me, both for studies and for new users opinions from more experienced


    I would add that the maps 1 and 2 gave problems, the 1 to the minimum jumping and the 2 meta gas after the 1750 was a hop, the 4 I have rebuilt from**** with calm in the home pc that ? much better as the first 2-place the netbook, the 3 the has now the customer as having the correct fast on a netbook murava for a few seconds at 3000 rpm, 4 load it tomorrow but should be ok.

  2. #2
    THE AVERAGE USER L'avatar di cinqueturbo
    Date Of Registration
    Sep 2012
    The resort
    The Milky Way
    Messages
    2,407
    Hi tidus,
    but your post and for an opinion?
    or want to share your work?
    squaring maps or noticed that to the left of the Lim.di torque which may be outside the driver golds for your choice?

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Apr 2013
    Messages
    591
    Map 4 ? ok, fine, ? a file for the study of new users, I have not touched all of the torque limiters since? some didn't need it, ? for a woman, indeed ? also too fancy, she was overjoyed, complained that struggled uphill, then it has a DPF so it was good to go cautious

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    Messages
    238
    hi tidus what program did you used to mod the map?

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Apr 2013
    Messages
    591
    Use ECM titanium

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    Messages
    238
    Citazione Originally Written by tidus1985 Visualizza Messaggio
    Use ECM titanium
    You have to if you created a driver with all the maps out of the drivers you've touched?

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Apr 2013
    Messages
    591
    no, just look for it here on the forum and you'll find them all, here c'? all to map each drive, just try it in the bottom of the 1.3 multijet 75hp and 90hp such as maps ? identical, change something here and there and maybe c'? a bit of offset on the map, and turbine ? managed with fixed geometry, but from pierburg, but all in all are the same

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    Messages
    238
    Citazione Originally Written by tidus1985 Visualizza Messaggio
    no, just look for it here on the forum and you'll find them all, here c'? all to map each drive, just try it in the bottom of the 1.3 multijet 75hp and 90hp such as maps ? identical, change something here and there and maybe c'? a bit of offset on the map, and turbine ? managed with fixed geometry, but from pierburg, but all in all are the same
    You are the one I knew ... I just Wanted to create a full feature driver

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •